0430310003-04-A0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Jumper Wires

Jumper wires are short electrical lengths of wire used to connect two separate circuits. They are also known as jumper cables and are most commonly used for prototyping or for repairs and modifications to existing circuits. They are especially useful for testing circuitry in projects with multiple components where it is not feasible to use a standard cable.

Jumper wires are universally constructed from copper coated with a protective insulation material, such as PVC. They are available in a variety of lengths, colours, and conductor sizes. The two main types of jumper wire are single-conductor and multi-conductor. Single-conductor jumper wires are the most common type, consisting of a single length of insulated wire with a buttoned metal tip on one end and bare metal at the other. Multi-conductor jumper wires are also available, comprising of multiple insulated, bundled wires.

Jumper wires can be pre-fabricated or made from uninsulated original wires. Uninsulated wires are useful in some prototyping scenarios where the length of the wire needs to fit into a specific application. They can be stripped of insulation on the ends and fitted with connectors, such as spade, crimp, or wire terminals.

Pre-Crimped Leads

Pre-crimped leads are a convenient way to join two electrical circuits. Pre-crimped leads, or pre-crimped wires as they are also known, are ready-made length of wire with female or male crimp connectors already attached at one or both ends. This makes connecting a circuit easier and faster than trying to solder wires, as there is no need to tin the wires. It also ensures that the connection is secure and reliable.

Pre-crimped leads are available in a variety of lengths and connector types and are compatible with many types of equipment. They are usually made from copper or tinned copper strands which are insulated with PVC or Teflon and fitted with PVC, rubber, steel, plastic, or metal fittings. The most common forms of pre-crimped leads are spade terminals and pin terminals. Spade terminals have tabs for either side of a screw connection, while pin terminals have a single hole for a bolt connection.

Pre-crimped leads are commonly used in computer wiring, industrial machinery, and automotive applications. They are also widely used in audio and visual applications, such as audio cables and guitar effects pedals. They can be used to replace broken or worn out wiring, or as an alternative to soldering.

0430310003-04-A0 Application Field and Working Principle

The 0430310003-04-A0 is a 2-phase aluminum-bodied brushless motor from Akanuma Industries. It is designed for use in office equipment, vending machines, and other small devices. It has a low profile, high power output, low noise, and low power consumption. It operates at 12V DC with a rated power of 3W, a rated torque of 30mNm, and a no-load speed of 4000RPM at 12V.

The 0430310003-04-A0 utilizes a permanent magnet brushless DC motor, and utilizes a sinusoidal commutation. It has a Hall element in the motor that senses the motor’s position and sends an output signal to the control circuit to synchronize the rotor’s position with the stator. This ensures that the motor runs at the correct speed and torque. The motor also has a built-in control circuit and integrated MOSFETs that can be programmed to adjust the motor’s speed and torque.

The 0430310003-04-A0 is a reliable and efficient motor. It is easy to use in projects due to its low profile and limited number of components. This motor is suitable for use in a variety of applications, including office equipment, vending machines, conveyor belts, and robot arms.

The specific data is subject to PDF, and the above content is for reference