Allicdata Part #: | 057-0709-001-ND |
Manufacturer Part#: |
057-0709-001 |
Price: | $ 0.00 |
Product Category: | Uncategorized |
Manufacturer: | ITT Cannon, LLC |
Short Description: | PV 20 E/B (RT ANGLE) |
More Detail: | N/A |
DataSheet: | 057-0709-001 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
057-0709-001 is a variable chip resistance attenuator. It is a monolithic integrated network consisting of four series-connected resistors and one shunt-connected resistor. The resistance between two output pads can be adjusted to various values by applying a control signal to the control pad. This device is suitable for applications such as test benches, instrumentation circuits, and detector networks.
The 057-0709-001 chip resistance attenuator is most commonly used to reduce an input signal level to a level suitable for specific applications. It is also known as a “variable gain attenuator” because the output level can be reduced much more than the input level. As the name implies, an attenuator reduces the power of a signal without distorting it in the process. Attenuators are commonly used in audio systems to match the signal level between different components.
The working principle of the 057-0709-001 chip resistance attenuator is relatively simple. The device is composed of four resistors in series and one resistor in parallel. The resistance of the series resistor drops from one end to the other as the voltage across the device increases. Similarly, the resistance of the parallel resistor also decreases with increasing voltage.
The variable resistance of the 057-0709-001 chip resistance attenuator can be adjusted by applying a control voltage to the control pad. The control voltage will vary the resistance of the series and parallel resistors so that the desired amount of attenuation can be achieved by adjusting the control voltage. By applying different control voltage levels, the total resistance of the device can be adjusted over a wide range.
The 057-0709-001 chip resistance attenuator is suitable for applications where the signal levels needs to be adjusted for proper performance. The variable resistance of the device allows the user to match the signal level between two or more components. The device can be used in analog and digital systems for both input and output applications.
The 057-0709-001 chip resistance attenuator is an efficient and cost-effective device for signal level matching. The device is available in a variety of packages and can be easily integrated into existing systems. The device provides a high degree of flexibility and accuracy in signal level matching.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE