Allicdata Part #: | 480-6083-ND |
Manufacturer Part#: |
060-1430-06 |
Price: | $ 575.04 |
Product Category: | Sensors, Transducers |
Manufacturer: | Honeywell Sensing and Productivity Solutions T&M |
Short Description: | SENSOR FORCE LOAD CELL 100LBS |
More Detail: | Load Cell Force Sensor 45.36kgf (100lbs) |
DataSheet: | 060-1430-06 Datasheet/PDF |
Quantity: | 5 |
1 +: | $ 522.76800 |
5 +: | $ 510.97400 |
10 +: | $ 501.14800 |
Series: | Model 31 |
Part Status: | Active |
Operating Force: | 45.36kgf (100lbs) |
Output: | Voltage |
Sensor Type: | Load Cell |
Voltage - Supply: | 5V |
Actuator Type: | Diaphragm |
Actuator Style/Size: | Stud, 6-32 UNC |
Operating Temperature: | -54°C to 121°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Force Sensors
Force Sensor is an instrument used to measure a force or forces applied to an object. Force Sensors are used to measure a force in terms of magnitude, direction or position. These sensors are useful in a wide range of applications, such as automotive safety systems, industrial process automation, and medical diagnostics. One of the most commonly used force sensors is the 060-1430-06, which is used to measure a variety of forces, from mild to extreme.
The 060-1430-06 is a single-axis, contact-based force sensor. It is a full-bridge Wheatstone bridge consisting of four strain gages and two resistors, one each in the upper and lower arm of the bridge. Two of the strain gages are placed under tension, while the other two are placed under compression. As a force is applied on the sensor, the strain gage on the upper arm will attempt to resist the force, while the strain gage on the lower arm will be subject to the force. This results in a change in the resistance of the strain gages, which can be measured using an appropriate measurement instrument, such as a Wheatstone bridge configuration. The 060-1430-06 sensor is capable of detecting forces ranging from 0.3N to over 700N.
The 060-1430-06 is often used in automotive safety systems, where it is used to measure the impact of a vehicular collision. Its robust construction allows it to detect forces within a wide range of magnitudes without suffering damage. It is also used in industrial process automation, where it is used to detect force variations and monitor machine operation. It is also widely used in medical diagnostics, where it is used to measure physiological forces in various applications, such as bioimpedance, reflex testing, and force measure from electrodes.
The 060-1430-06 has a number of advantages over other types of force sensing technologies. It is typically more reliable and accurate than other types of force sensors, and it is also more robust and can be used in harsher environments. Furthermore, it is easy to install and requires minimal calibration. Additionally, the 060-1430-06 sensor is the most cost-effective force sensor available on the market, making it an ideal choice for a variety of applications.
The 060-1430-06 force sensor is used in a variety of industries, from automotive safety to industrial process automation. Its robust construction and accurate force sensing capabilities make it an ideal choice for a variety of applications where reliable force measurements are required. The 060-1430-06 force sensor is reliable, accurate, and cost-effective, making it an excellent choice for applications that require reliable force measurements.
The specific data is subject to PDF, and the above content is for reference
2.2 INCH BEND SENSOR A201Force Sensor
WEIGHT SENSOR (LOAD CELL) 0-800KForce Se...
WEIGHT SENSOR (LOAD CELL) 0-400KForce Se...
WEIGHT SENSOR (LOAD CELL) 0-350KForce Se...
WEIGHT SENSOR (LOAD CELL) 0-200KForce Se...
WEIGHT SENSOR (LOAD CELL) 0-150KForce Se...