Allicdata Part #: | 0634462214-ND |
Manufacturer Part#: |
0634462214 |
Price: | $ 116.01 |
Product Category: | Tools |
Manufacturer: | Molex, LLC |
Short Description: | PUNCH |
More Detail: | N/A |
DataSheet: | 0634462214 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 105.46200 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Since the early 2000s, the 0634462214 has been a much sought-after tool for a variety of industrial applications. Its popularity is due to its ability to efficiently perform jobs without the need for a large setup or long cycle times.
The 0634462214 is part of the crimpers, applicators, and presses family, and while it may look like a fairly simple device, it is actually quite sophisticated. It is designed to provide precise, controlled, and repeatable crimping of a variety of materials, ranging from very soft pliable plastics to hard-to-reach metals.
The 0634462214 is composed of a series of rods, locks, and crimping pliers. The locks are designed to provide the device with the desired crimping pressure and the rods provide the device with the necessary stability for precise and repeatable crimping.
To use the 0634462214, the material to be crimped is first placed into the housing. Once the material is loaded, the lugs, pins or locks are set in place. The lugs, pins or locks will prevent the material from shifting once the process has finished. Next, the rod is locked into the locking mechanism, ensuring the desired crimping pressure is achieved.
Once these components are in place, the crimping pliers are activated. As the crimping jaws close, the pressure of the jaws will pinch the material until the desired crimping has been achieved. The pliers then open again, allowing the crimped material to be released. This process is repeated until all the required pieces are crimped.
The 0634462214 is a highly versatile piece of equipment and can be used for a wide range of industrial applications. It can be used for crimping everything from wire terminals and compression fittings to complex electrical connections. It is also capable of crimping materials as thin as 14-gauge to as thick as 1/2 inch. The 0634462214 is also beneficial in terms of safety, as it eliminates the need for hand-crimping, thereby reducing the chance of injury.
The 0634462214 has a long history of reliable service in industrial settings. It is an incredibly durable and reliable tool that has become a staple in many industrial settings. While it may be slightly more expensive than some other crimping tools, its versatility and reliability make it well worth the investment.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
C702 10M008 0634 | Amphenol Sin... | 14.53 $ | 1000 | CONN SMARTCARD 8POS R/A S... |
82375-0634 | Omron Automa... | 686.96 $ | 1000 | YELLOW SGEY-365 SAFETY ED... |
0634440805 | Molex, LLC | 102.91 $ | 3 | PUNCH |
0634441116 | Molex, LLC | 82.33 $ | 1 | PUNCH |
0634570077 | Molex, LLC | 241.69 $ | 3 | CONDUCTOR PUNCH |
0634441302 | Molex, LLC | 125.68 $ | 2 | PUNCH |
0634560116 | Molex, LLC | 67.68 $ | 1000 | INSULATION ANVIL |
0634560013 | Molex, LLC | 72.04 $ | 1000 | INSULATION ANVIL |
0634560066 | Molex, LLC | 82.33 $ | 1000 | INSULATION ANVIL |
0634451216 | Molex, LLC | 82.33 $ | 1000 | ANVIL |
0634441005 | Molex, LLC | 116.01 $ | 1000 | PUNCH |
0634570065 | Molex, LLC | 135.35 $ | 1000 | CONDUCTOR PUNCH |
0634570010 | Molex, LLC | 154.68 $ | 1000 | CONDUCTOR PUNCH |
0634540066 | Molex, LLC | 193.35 $ | 1000 | INSULATION PUNCH - OVERLA... |
0634570075 | Molex, LLC | 241.69 $ | 1000 | CONDUCTOR PUNCH |
0634430049 | Molex, LLC | 241.69 $ | 1000 | FRONT CUT-OFF PLUNGER RET... |
0634540072 | Molex, LLC | 327.45 $ | 1000 | INSULATION PUNCH |
M39006/22-0634 | Vishay Sprag... | 29.64 $ | 1000 | CAP TANT 30UF 10% 100V AX... |
61082-063420LF | Amphenol FCI | 1.06 $ | 1000 | CONN RECEPT 60POS .8MM DU... |
61082-063409LF | Amphenol FCI | 1.11 $ | 1000 | CONN RECEPT 60POS .8MM DU... |
61083-063409LF | Amphenol FCI | 1.11 $ | 1000 | CONN HEADER 60POS .8MM DU... |
61082-063406LF | Amphenol FCI | 1.36 $ | 1000 | CONN RECEPT 60POS .8MM DU... |
61082-063422LF | Amphenol FCI | 1.4 $ | 1000 | CONN RECEPT 60POS .8MM DU... |
61083-063400LF | Amphenol FCI | 1.4 $ | 1000 | CONN HEADER 60POS .8MM DU... |
61083-063422LF | Amphenol FCI | 1.54 $ | 1000 | CONN HEADER 60POS .8MM DU... |
61083-063429LF | Amphenol FCI | 1.59 $ | 1000 | CONN HEADER 60POS .8MM DU... |
61082-063400LF | Amphenol FCI | 2.63 $ | 1000 | CONN RECEPT 60POS .8MM DU... |
0634540040 | Molex, LLC | 374.22 $ | 1000 | PUNCH |
0634540042 | Molex, LLC | 374.22 $ | 1000 | PUNCH |
0634857401 | Molex, LLC | 374.22 $ | 1000 | COVER APAPTER |
0634660301 | Molex, LLC | 280.67 $ | 1000 | REAR PLUNGER RETAINER |
0634540044 | Molex, LLC | 232.02 $ | 1000 | INSULATION PUNCH |
0634541701 | Molex, LLC | 232.02 $ | 1000 | INSULATION PUNCH |
0634570116 | Molex, LLC | 232.02 $ | 1000 | CONDUCTOR PUNCH |
0634432006 | Molex, LLC | 241.69 $ | 1000 | ANVIL |
0634432007 | Molex, LLC | 241.69 $ | 1000 | ANVIL |
0634570009 | Molex, LLC | 241.69 $ | 1000 | CONDUCTOR PUNCH |
0634570031 | Molex, LLC | 241.69 $ | 1000 | CONDUCTOR PUNCH |
0634570044 | Molex, LLC | 241.69 $ | 1000 | CONDUCTOR PUNCH |
0634570048 | Molex, LLC | 241.69 $ | 1000 | CONDUCTOR PUNCH |
RETAINER PLATE/STRIP CUTOFF
GAGE PIN ASSEMBLY
LOCATOR MINI EJECTOR
MEP-6T TOUCH SCREEN/MESSAGE SYST
SEATING TI ASSEMBLY
INSET TL ASSY 5 PR 14 COLUMN