0982680366

Series:	Premo-Flex™ 98268
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	30
Pitch:	0.049" (1.25mm)
Length:	1.180" (29.97mm)
Length - Exposed Ends:	0.157" (4.00mm)
Termination Style:	Top on One Side, Bottom on Other, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex Ribbon Jumper Cables: Application Field and Working Principle

Flat flex ribbon jumper cables are electrical connectors to interconnect two hardware components of a circuit. These cables are made of thin, conductive connection wires, often made of Kynar or other polyester material, and are slightly flexible, which allows them to fit in tight spaces and be used in small movements. These cables are also often used to bridge two non-compatible components, such as two circuit boards, in order to allow signals to travel between them.The application field of these flat flex cables is quite wide. They are used in a variety of electronic and mechanical devices, including computer systems, industrial communication systems, audio and video production systems, and home entertainment systems. They are also widely used in medical products, consumer electronics, and various industrial and aerospace applications.As for the working principle of flat flex ribbon jumper cables, these cables are designed to work by providing interconnection of two components in a circuit, thus allowing signals to travel between them. The cables are constructed with flat flex layers, each layer consists of two parts: flexible connector foil and flexible flat cable, that are usually insulated. When current is transferred through the layers, it causes resistance between the two components. This resistance is typically between 5Ω to 50Ω, depending on the material used and the current that is passing through.The flexible flat cable materials used in these flat flex cables include metal, paper and plastic. Metal offers the most reliable and cost-effective solution, as it allows for higher current and better insulation. Paper is a less expensive material, but it is not suitable for higher currents. Plastic is an optimal choice, since it is the most flexible material, is lightweight and inexpensive, and provides good thermal insulation.The design of flat flex ribbon jumper cables includes four key components: dielectric layer, flat flex layer, connector and conductor. The dielectric layer is the base of the cable, and it prevents any electrical current from transferring between the conductor and the conductive layer, thus providing insulation. The flat flex layers are the thin layers of conductive material, and they provide the electrical connection between the two components, in order to bridge the gap between them. The connector is what holds the two layers together, and is usually made of metal or another conductive material. The conductor is the connection between the two components, and it is either a piece of wire or stranded wire bundle, or a strand of metal or plastic.The working principles of flat flex ribbon jumper cables are quite simple: current is transferred between the two components, thus allowing signal to travel between them. However, careful consideration must be given to the design of the cable, in order to ensure that the cables are able to transfer the right amount of current without causing any damage to the components. Properly designed flat flex cables also provide an efficient and reliable electrical connection between the components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description