1-1415898-4

Series:	RT1, Inrush, SCHRACK
Packaging:	Tube
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Relay Type:	General Purpose
Coil Type:	Non Latching
Coil Current:	16.7mA
Coil Voltage:	24VDC
Contact Form:	SPST-NO (1 Form A)
Contact Rating (Current):	16A
Switching Voltage:	400VAC - Max
Turn On Voltage (Max):	16.8 VDC
Turn Off Voltage (Min):	2.4 VDC
Operate Time:	10ms
Release Time:	5ms
Features:	Insulation - Class F, Sealed - Flux Protection
Mounting Type:	Through Hole
Termination Style:	PC Pin
Operating Temperature:	-40°C ~ 85°C
Contact Material:	Silver Tin Oxide (AgSnO)
Coil Power:	400 mW
Coil Resistance:	1.44 kOhms

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

_Power relays are electrical components designed to open and close with the application of electrical current. They are frequently used in power control applications, such as motor control, lighting, and circuit breaker control. The 1-1415898-4 power relay is a remotely operated relay that can be used to control high load currents up to 2 amps.This power relay is a single-pole, double-throw (SPDT) relay, which means the device uses two switches to route the incoming power to one of two separate outputs. The relay can be configured with either normally open (NO) or normally closed (NC) operation so it can be used to turn a device on or off. This type of configuration also helps to protect the relay from sourcing too much current, as the current is always routed through one switch at a time.The 1-1415898-4 power relay is designed so that it can be triggered remotely, either through an electrical connection or through radio frequency. It has a built-in antenna that can be used to detect any input signal, allowing the relay to be triggered at a distance. The remote activation of the relay can also be used to activate other electrical switches in the system, providing a range of control possibilities.When externally triggered, the 1-1415898-4 power relay will close the normally open switching element, allowing the current to flow. When the trigger signal is removed, the power relay will switch back to its default state and the relay will open, stopping the flow of current. This allows the relay to be used as part of a larger circuit, controlling the flow of power to other components.The 1-1415898-4 power relay is designed for reliable operation with low power consumption. It is capable of switching high current loads and is suitable for use in many applications, from industrial automation to consumer electronics. The relay is also rated to EN50022 and UL approval, ensuring a high degree of reliability in a wide range of applications.The 1-1415898-4 power relay is an ideal choice for applications requiring a remotely controlled relay with reliable operation. It is designed to handle up to 2 amps of current, making it suitable for controlling larger loads. The built-in antenna and low power consumption make it a great choice for remote applications, and the UL approval rating ensures that the device will be reliable in a wide range of situations.

The specific data is subject to PDF, and the above content is for reference