100-330J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, often referred to as chokes, are passive electrical components whose job is to block or limit the direct current (DC) while allowing the desired alternating current (AC) to flow freely. Inductors with ratings of 100-330J are used in numerous electrical circuits.

Application Field

Fixed inductors rated 100-330J are often used in power supplies, audio amplifiers, and LCD and LED displays to protect them from power surges, increase voltage, and reduce interference, respectively. In home appliances, these are used to control electric motors, since they can store energy in a magnetic field and then release it when needed. Inductors are also used in many home and industrial automation systems and computer equipment.

Working Principle

The core material of a 100-330J inductor helps it pass the current from an AC power source to resistors or transistors. The inductor constricts the flow of current, creating a magnetic field. With the help of a coil, the inductor stores the energy released by the electric current in the coil. Whenever a high frequency current reaches the inductor, the stored energy is released back into the circuit. This helps reduce interference in the current.

An inductor works on the law of Faraday\'s laws of inductance. This law states that whenever a current passes through a conductor, a magnetic field forms around it which will oppose any changes in the current. This means that when the current increases or decreases, the magnetic lines of force try to oppose it. Thus, it creates a force that resists the change in current.

Fixed inductors rated 100-330J are also used to filter AC signals. When the inductor receives an AC signal, the magnetic field created by the inductor absorbs some of the energy in the signal. This filtered signal is then passed on to the load. This way, the inductor helps reduce electrical noise in the system.

Some inductors are also used as voltage regulators. In this application, the inductors act as a buffer between the AC and DC power lines. When the AC current is too high, the inductor will draw more current from the DC source, thus reducing the voltage. Conversely, when the AC current is too low, the inductor will draw less current from the DC source, thus raising the voltage.

Fixed inductors are also used as transformers. These devices are used to convert high voltage power sources into low voltage devices. When a voltage is applied to a coil, the induced magnetic field steps up or step down the voltage. This helps reduce power losses and increases efficiency in the system.

These are just some of the many ways in which fixed inductors rated 100-330J are used. These devices are very important in many electrical and electronic circuits, as they provide noise suppression, increase efficiency and reduce power losses.

The specific data is subject to PDF, and the above content is for reference