1393815-8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are small electrical components which are designed to work as a switch. They help to switch an electrical connection on and off depending on the signals given by other components. The relay can be switched manually using a button or a switch, or it can be controlled remotely by an external controller. The 1393815-8 signal relays are designed specifically for up to two amps of current.

The relay is composed primarily of three components: the coil, the contact points, and the armature. The coil is an electromagnet which produces a magnetic field when current is passed through it. This field causes the armature to move, thereby closing or opening the contact points.

The contact points are designed to allow current to flow into the circuit when they are closed and block it when they are open. Depending on the design of the relay, these contact points can be either normally open (NO) or normally closed (NC). When the armature is moved, it will cause either the NO or NC contacts to be opened or closed.

1393815-8 signal relays are designed to handle up to two amps of current. This amount of current is sufficient to power many electronic components such as LEDs, motors, and even small resistors. The relays are also designed to handle up to twenty volts of power. The relay is usually operated through a 5V signal and its output signal can be up to 200 mA. The response time of this relay is usually within 3-5 ms.

The applications for 1393815-8 signal relays are predominantly for on/off control for devices in the same circuit or between two or more different circuits. It can also be used for indicator light control, motor speed control, low level control, and homing/positioning control.

The working principle for 1393815-8 signal relays is based on the operation of an electromagnet. When a current is passed through the coil, it produces a magnetic field which causes the armature to move and close or open the contact points. This in turn switches the output on or off and is used to control various devices.

In summary, the 1393815-8 signal relays are designed to control an output up to two amps and twenty volts with an input signal of 5V and an output signal of 200 mA. These relays can be used for various on/off control applications such as indicator light control, motor speed control, and low level control. The working principle behind the relay is based on the operation of an electromagnet which causes the armature to move and close or open the contact points.

The specific data is subject to PDF, and the above content is for reference