1722533023-08-B7

Jumper Wires

Jumper wires are short length electrical cables that are used for making temporary connections between various electronic components. They are particularly useful in applications that require making connections of multiple points such as prototyping or repairing circuit boards. Jumper wires are basically insulated wires (usually with a PVC insulation) with either flexible or rigid insulation, and solid or stranded conductors that have terminated on one or both ends. They are available in different lengths, colors, insulation, and strandings.

The most common type of jumper wire is the solid core which is usually used for prototyping, and the stranded wire which is good for making connections to resistance and capacitor leads to avoid breakage. In terms of usage, the solid core is more suitable for making easy, low-current loop connections; while the stranded is recommended for more rigorous and complex connections which require wiring to be flexed without damaging them. The length of the jumper wires used in a specific project depends on the application and the location of the components.

Pre-Crimped Leads

Pre-crimped leads are sources of specialized interconnections that are used in a variety of electronics projects. They are an array of leads that have already been crimped with a terminal at one end and insulated at the other. As such, they are often used as a permanent substitute for jumper wires. Pre-crimped leads can be used in a number of ways, such as in high-density circuit boards, imaging systems, robotics, and many other areas.

Pre-crimped leads are available in a wide variety of configurations. The most common type is the male/female lead which can either have a male terminal at one end and a female terminal at the other, or vice versa. The crimped area can also be threaded, crimped or soldered. The insulation material can be made from vinyl, Teflon, PTFE, or other shielding materials depending on the requirement of the application. In terms of length, pre-crimped leads usually come in standard lengths but can be custom-made to suit the needs of any project.

1722533023-08-B7 Application Field and Working Principle

The 1722533023-08-B7 is a jumper wire built with a stranded core conductor and an insulated PVC jacket. Finalizing of both ends is done by crimping a male and a female terminal. The wire has 7 strands of copper conductor with 0.08mm2 gauged wire. It is suitable for use in various electrical and electronic applications including audio, automotive, and consumer electronics. The wire is designed for breaking strength, creepage, and contact resistance requirements.

The working principle of the 1722533023-08-B7 jumper wire is simple. The first step is to crimp the appropriate male and female terminals on the two ends of the wire. The terminals need to be completely and stable attached, so it is recommended to use a reliable crimping tool for this purpose. Once the terminals are attached, the jumper can be connected between two devices which need to be communicated with each other. This jumper will effectively establish the connection between the two devices, allowing electricity to flow and data to be exchanged.