1780507

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.6-0.8 Nm (5.3-7.1 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	--
Housing Material:	Polyamide (PA), Nylon
Operating Temperature:	--
Color:	Green
Features:	Feed Through, Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	COMBICON KDS
Wire Gauge:	10-30 AWG
Voltage:	300V
Current:	30A
Mating Orientation:	Horizontal with Board
Pitch:	--
Positions Per Level:	1
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Terminal blocks - Wire to Board, or in short TB Wire to Board (WTB), are an essential component in an industry, making a direct connection between an electronic/electrical circuit and a wire or a cable. TB WTB are used to safely attach two or more wires to a single conductor, making the connection secure and protected. This minimizes the chances of electric shock and also reduces the amount of resistance in the circuit. TB WTB also have the ability to protect against over current, short circuit, and other conditions that could lead to malfunctioning or even destruction of a device.

Types of Terminal Blocks - Wire to Board

Terminal blocks – Wire to board come in many different shapes and sizes. Some commonly used types include: barrier strip terminal blocks, printed circuit terminals, insulated terminals, solderless terminals, and screw-terminal blocks.

• Barrier strip terminal blocks - These blocks are designed for connecting bottom side components to circuit boards. The blocks are usually mounted on a PCB (printed circuit board) and feature a terminal post at one end. Each block is provided with a pair of screw calibrated screws to secure the connection.
• Printed Circuit Terminal blocks - This is a type of terminal block that is designed to connect a PCB to a particular type of line or wire. The terminal block comes with a pre-wired connector that can be used for faster installation.
• Insulated terminals - Insulated terminal blocks are designed to protect the terminals for maximum safety. These blocks are used for connecting high-voltage wires to a circuit board. They come with a double circuit and are made of either metal or plastic.
• Solderless terminals - These terminals are often used in areas where there is a need for a quick connection without soldering. The terminals feature a “hook” or “spade” type of connector that is pressed down into place.
• Screw terminals - As the name suggests, these terminal blocks are secured by screws rather than by solder. They are often used in places where a permanent connection is desired and need to be remade periodically.

Applications of Terminal Blocks - Wire to Board

Terminal blocks – Wire to Board are used for a wide variety of applications. These include:

• Computer and communication systems
• Radio and wireless communication systems
• Automotive systems
• Home automation systems
• Industrial and special purpose control systems
• Medical instrumentation and monitoring systems
• Aircraft and aerospace systems

Working Principle of Terminal Blocks - Wire to Board

Terminal blocks – Wire to Board work by connecting a single wire or a group of wires to a printed circuit board (PCB). The corresponding terminal post on the PCB is then exposed so that the connection can be securely made. Once the connection is made, the terminal block is able to transfer electrical current from one connection point to another. In order for the connection to be made, the wire must be pre-wired to the terminal posts on the PCB. This is done by attaching the wire to the terminal posts with a crimp connector or by soldering the wire to the terminal post. When the connection is made, the terminal blocks – Wire to Board will be able to transfer electrical current from one side of the PCB to the other. The terminal post and the wire must be properly secured and held in place when connecting any electrical device so as to ensure that the connection will not become loose or disconnected. This is especially important for high voltage connections where failure to secure the wiring can lead to potential short circuits.

Advantages of Terminal Blocks - Wire to Board

Terminal blocks – Wire to Board offer several advantages over traditional methods of hard-wired connections. One advantage is that they are easy to install and can be used in any type of electrical application. Another benefit of TB WTB is that they reduce labor and time required for wiring since they require less complex wiring. This helps to reduce costs for industries and electronic manufacturers. In addition to that, TB WTB offer improved protection from electric shock, short circuit, and interference. This improves the overall safety and performance of any electrical device connected to it. Finally, TB WTB are design for maximum durability and reliability. This helps to ensure that the connection lasts a long time and provides a reliable connection for a variety of applications.

Conclusion

Terminal blocks – Wire to Board (WTB) are vital components for any industry looking to make a secure connection between a wire and an electronic or electrical circuit. WTB come in different shapes and sizes, each suited for different types of applications. WTB provide several advantages such as improved safety, easy installation, and improved durability. This makes them an essential part of any electrical system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description