Allicdata Part #: | 20-CBSA-0.75X5.25X0.2-ND |
Manufacturer Part#: |
20-CBSA-0.75X5.25X0.2 |
Price: | $ 15.16 |
Product Category: | RF/IF and RFID |
Manufacturer: | Leader Tech Inc. |
Short Description: | 20 SERIES CBS SHIELD ASSEMBLY - |
More Detail: | RF Shield Shield, 2-Piece 0.750" (19.05mm) X 5.250... |
DataSheet: | 20-CBSA-0.75X5.25X0.2 Datasheet/PDF |
Quantity: | 1000 |
22 +: | $ 13.77610 |
Series: | 20-CBS |
Part Status: | Active |
Type: | Shield, 2-Piece |
Height - Overall: | 0.200" (5.08mm) |
Length - Overall: | 5.250" (133.35mm) |
Width - Overall: | 0.750" (19.05mm) |
Ventilation: | Non-Vented |
Mounting Type: | Surface Mount |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Shields, a type of device that attempts to limit the amount of radiation created by electromagnetic devices, can be used to prevent interference with other signals. The 20-CBSA-0.75X5.25X0.2 is a specialized type of RF shield designed for specific applications. This article will discuss the application field and working principle of this product. The 20-CBSA-0.75X5.25X0.2 is specially designed to withstand the harsh environment of the automobile industry. This type of RF shield is often used to reduce interference between automotive electronic control systems as well as various other devices, like cellphones, that operate on the same radio frequency. In addition, this type of RF shield is able to block out electromagnetic waves up to a certain frequency, which makes it ideal for applications in which the frequency of a signal needs to be limited. In terms of its design, the 20-CBSA-0.75X5.25X0.2 features a Faraday cage, a metal screen used to block out any incoming and outgoing electromagnetic radiation. This type of shield is made from a combination of aluminum and copper layers that act as conductors. The metal mesh of the shield is designed to create an almost “perfect” design, as all of the electromagnetic waves that enter the cage and reach the outer device are perfectly absorbed. In use, the 20-CBSA-0.75X5.25X0.2 RF shield works by blocking out incoming electromagnetic radiation and preventing it from passing through the shielding material. This type of shield is able to block out radiation of up to a certain frequency, which is determined by the particular mesh size and configuration of the shield. To achieve a higher degree of shielding, the shield can be placed between the source of the electromagnetic radiation and the receiving device. This will provide greater protection from both outgoing and incoming radiation.In addition, this type of RF shield can be used to reduce any interference with a device’s signal frequency. For instance, if two systems are running on the same frequency and are located close to each other, then an RF shield can be used to reduce the amount of interference that occurs. This is done by blocking out any incoming radiation from one system and allowing the electromagnetic signal to be received by the other system without interference. Overall, the 20-CBSA-0.75X5.25X0.2 is a specialized type of RF shield designed for automotive applications. This shield is designed to conduct and absorb incoming and outgoing electromagnetic radiation, thus reducing interference with other signals. Its Faraday cage is made from a combination of aluminum and copper layers, and it’s able to block out radiation of up to a certain frequency. Additionally, this RF shield also reduces any interference with a device’s signal frequency, thereby providing greater protection from both incoming and outgoing radiation.
The specific data is subject to PDF, and the above content is for reference
48 SERIES CBS SHIELD ASSEMBLYRF Shield S...
49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...
21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...
42 SERIES CBS SHIELD ASSEMBLYRF Shield S...
55 SERIES CBS SHIELD ASSEMBLY -RF Shield...
29 SERIES CBS SHIELD ASSEMBLY -RF Shield...