2029-35-SM-RPLF

The 2029-35-SM-RPLF, can mainly be found in above-ground installations and is suitable for direct lightning from the atmosphere, as well as nearby and multiple lightning shocks. It is made of three components, the GDT, short-term surge arrester and additional signalling pieces. The GDT in this arrester is composed of three electrodes, each of which is sealed with a separate pin. The electrodes are all enclosed in a quartz tube that is filled with a gas mixture of nitrogen and oxygen. The conductivity between the electrodes is sufficient when the voltage levels rise to the breakdown point of the GDT.

The arrester polymer housing acts as an additional safety layer for the electronics system. This housing acts as a lightning pole to divert the current away from the GDT and other components, and also to stop any further lightning shocks. The short-term surge arrester is placed in parallel with the GDT and provides additional levels of protection for sensitive loads and short-term electrical failure caused by lightning flashes.

The additional signalling pieces consist of an alarm contact, a current tap, and a surge detector. These components are used to monitor the current and voltage spikes around the arrester in order to identify electrical failure and switch off the arrester if necessary. In addition, the current tap is used to provide a warning signal to the system before lightning strikes.

The 2029-35-SM-RPLF arrester has excellent surge protection capabilities and is suitable for use in a variety of applications. It can be used in power transmission and distribution, as well as in industrial and residential environments. The arrester offers a high degree of protection against lightning induced transients, as well as short-term surges. The additional features of the arrester make it suitable for use in applications where additional monitoring is required.

In conclusion, the 2029-35-SM-RPLF arrester is an excellent option for a variety of applications, and its working principle is clear and straightforward. Its use of a GDT, short-term surge arrester, and additional signalling pieces makes it well-suited for a range of different applications, and its design offers excellent surge protection capabilities. As a result, the 2029-35-SM-RPLF is a reliable and cost-effective option for protecting electrical and electronic equipment from sudden voltage changes.