2035-15-SM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube (GDT) arresters are devices designed to minimize lightning and line surge-induced damage to power and communication systems by acting as a protective element to break the circuit when an electrical surge threatens the system. Gas Discharge Tubes have been used extensively in telecommunications, power distribution, and other critical industries since the early 1990s, and have been further developed and refined over time through advances in technology.

The GDT arrester consists of a glass or ceramic tube which is filled with a dielectric gas such as argon, krypton, or xenon. Inside the tube are two metal electrodes; a metal end cap attached to the tube and a central electrode located in the center of the tube. When a surge current is introduced onto the arrester, the gas within the tube, heated by the voltage, begins to break down, reducing the electrical resistance of the device. As the current flows through the tube, the resistance decreases, allowing the current to be transferred to the ground, thus protecting the system from the destructive surge.

One of the most common applications of GDTs is in power distribution systems. GDTs are used in substations and power lines to protect instruments and equipment from the damaging effects of electrical surges in the form of lightning strikes. GDTs can also be used to protect electronic equipment, such as computers, from voltage spikes that occur from disturbances on the power system.

The working principle of GDTs is relatively simple; when a surge of voltage is introduced, the metal electrodes at either end of the device start to heat up; the dielectric gas inside the tube begins to ionize and break down. This reduces the resistance of the device, allowing the current to be diverted safely to the ground before it can reach the system or equipment being protected.

Over the past few decades, Gas Discharge Tube Arresters have proven to be a reliable and effective protection solution for power and communication systems. In recent years, further improvements in technology have allowed GDTs to be more compact and reliable, making them suitable for a wider range of applications. With the increasing demand for power and communication systems, GDTs continue to be an important component in ensuring the reliability and safety of the these systems.

The specific data is subject to PDF, and the above content is for reference