20S-CBSA-1.75X2.25X0.2

Series:	20-CBS
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.200" (5.08mm)
Length - Overall:	2.250" (57.15mm)
Width - Overall:	1.750" (44.45mm)
Ventilation:	Non-Vented
Mounting Type:	Surface Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to RF Shields

Radio frequency (RF) shielding is an important aspect of protecting electronic devices from interference. Shielding refers to a physical barrier that is designed to block or reduce unwanted radio frequency energy. RF shielding can be used in a variety of applications, such as protecting electronic components from interference, protecting sensitive data from being intercepted, or keeping RF sensitive equipment in a safe environment.The purpose of RF shielding is to create an environment that blocks or reduces the amount of electromagnetic waves that reach the protected area. This is accomplished by surrounding the area with a material that acts as a barrier to the waves. RF shielding materials typically consist of metals such as copper, aluminum, or steel, though other materials such as carbon fiber, concrete, and plastic may also be used. Different types of RF shields achieve different levels of shielding effectiveness.

The 20S-CBSA-1.75X2.25X0.2 Shield

The CBSA-1.75X2.25X0.2 shield is a type of RF shield used in a variety of applications such as electronic component protection and protecting sensitive data from being intercepted. Its shielding effectiveness is rated at greater than 80 dB at 1 GHz. The 20S-CBSA-1.75X2.25X0.2 shield is constructed from Cu/Be shielding material. The thickness of the shield is 0.2mm, and the size of the shield is 1.75x2.25 inches. The shield has a two-step shielding structure, with a ground plane on the bottom and multiple ground planes on the top.

The 20S-CBSA-1.75X2.25X0.2 Application Field and Working Principle

The 20S-CBSA-1.75X2.25X0.2 shield can be used in a variety of applications such as protecting sensitive data from being intercepted, protecting electronic components from interference, and keeping RF sensitive equipment in a safe environment. The 20S-CBSA-1.75X2.25X0.2 shield works by creating a barrier to incoming RF energy. The thick material of the shield blocks or redirects incoming electromagnetic waves, allowing only a minimal amount to reach the protected area.The 20S-CBSA-1.75X2.25X0.2 shield is designed with a two-step shield structure that works in two ways. The first step is a ground plane that serves as the base of the shield, effectively blocking the majority of the RF energy from entering the protected area. The second step is multiple ground planes, stacked one on top of the other. These planes are designed to act as a series of physical barriers, further reducing the amount of RF energy that reaches the protected area.The combination of the two shielding layers makes the 20S-CBSA-1.75X2.25X0.2 shield an effective way to protect against interference and other unwanted RF energy. The shield can be installed quickly and easily and is a cost-effective solution for many applications.

Conclusion

The 20S-CBSA-1.75X2.25X0.2 shield is an effective RF shield, designed to create a barrier to incoming RF energy. The two-step shielding structure helps to block or redirect the incoming RF energy, allowing only a minimal amount to reach the protected area. The shield is easy to install and is a cost-effective solution for many applications.

The specific data is subject to PDF, and the above content is for reference