20S-CBSA-3.5X3.75X0.2 Allicdata Electronics
Allicdata Part #:

20S-CBSA-3.5X3.75X0.2-ND

Manufacturer Part#:

20S-CBSA-3.5X3.75X0.2

Price: $ 17.23
Product Category:

RF/IF and RFID

Manufacturer: Leader Tech Inc.
Short Description: 20S SERIES CBS SHIELD ASSEMBLY -
More Detail: RF Shield Shield, 2-Piece 3.500" (88.90mm) X 3.750...
DataSheet: 20S-CBSA-3.5X3.75X0.2 datasheet20S-CBSA-3.5X3.75X0.2 Datasheet/PDF
Quantity: 1000
20 +: $ 15.65270
Stock 1000Can Ship Immediately
$ 17.23
Specifications
Series: 20-CBS
Part Status: Active
Type: Shield, 2-Piece
Height - Overall: 0.200" (5.08mm)
Length - Overall: 3.750" (95.25mm)
Width - Overall: 3.500" (88.90mm)
Ventilation: Non-Vented
Mounting Type: Surface Mount
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

RF shields refer to any materials used to protect electronic components from the influence of electromagnetic interference from outside sources. The 20S-CBSA-3.5X3.75X0.2 RF shield is a two-part, self-locking, open-bottom, soldered shield used to protect electronic circuits from electromagnetic interference. This shield is designed to fit over a variety of electronic components, including chips, transistors, and diodes.

Application Fields and Working Principles

The 20S-CBSA-3.5X3.75X0.2 RF shield is most often used in communications and radar applications. In these applications, the shield acts as a barrier to protect sensitive components from any electromagnetic interference that might affect the performance of the circuit. The two-part shield consists of an outer shield and an inner shield. The inner shield houses the components that need protection from interference, while the outer shield acts as the protective barrier against external signals.The inner shield is comprised of a thin film of electrically conductive material, such as aluminum or copper, and is designed to act as an electrical barrier to any incoming interference. It is connected to ground to ensure that all of the circuit components are prevented from being exposed to any interference. The outer shield is also made of a conductive material, such as aluminum foil or copper mesh. This outer layer provides an additional layer of protection against any external interference.

Advantages of Using 20S-CBSA-3.5X3.75X0.2 RF Shielding

One of the main advantages of using the 20S-CBSA-3.5X3.75X0.2 RF shield is its ability to provide a high degree of isolation from outside sources of interference. This shielding also helps to reduce noise in sensitive RF circuits. The self-locking mechanism of the shield ensures a secure and reliable fit, increasing circuit reliability. Additionally, the two-part design allows for easy access to components when needed. The 20S-CBSA-3.5X3.75X0.2 RF shield is also relatively easy to install. The self-locking mechanism allows for a quick and secure installation, while the open-bottom design allows for the easy removal and replacement of components when necessary. Additionally, the shield is resistant to degradation and corrosion, making it an ideal choice for use in applications where consistent performance is important.

Conclusion

The 20S-CBSA-3.5X3.75X0.2 RF shield is an effective and reliable way to protect electronic components from electromagnetic interference. It provides a high level of shielding and is resistant to degradation and corrosion. Additionally, the two-part design allows for easy installation and access to the components, making it an ideal choice for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
48-CBSA-1.25X5.75X0.4

48 SERIES CBS SHIELD ASSEMBLYRF Shield S...

48-CBSA-1.25X5.75X0.4 Allicdata Electronics
49L-CBSFNSV-0.75X1.75X0.5

49L-CBSFNSV-0.75X1.75X0.5--49L13RF Shiel...

49L-CBSFNSV-0.75X1.75X0.5 Allicdata Electronics
21M-CBSA-5.25X5.75X0.225

21M SERIES CBS SHIELD ASSEMBLY -RF Shiel...

21M-CBSA-5.25X5.75X0.225 Allicdata Electronics
42-CBSA-5.0X5.75X0.4

42 SERIES CBS SHIELD ASSEMBLYRF Shield S...

42-CBSA-5.0X5.75X0.4 Allicdata Electronics
55-CBSA-4.5X5.75X0.5

55 SERIES CBS SHIELD ASSEMBLY -RF Shield...

55-CBSA-4.5X5.75X0.5 Allicdata Electronics
29-CBSA-5.75X6.0X0.2

29 SERIES CBS SHIELD ASSEMBLY -RF Shield...

29-CBSA-5.75X6.0X0.2 Allicdata Electronics