20S-CBSA-5.5X6.25X0.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 20S-CBSA-5.5X6.25X0.5 RF shields are widely used in the electronics industry. These shields are typically used for controlling EMI (electromagnetic interference) and RFI (radio frequency interference) in various applications, including audio, communications, networking, and automotive systems.

RF shields are designed to protect equipment from interference or noise from electronic devices. They are constructed from metal plates, typically either copper or aluminum, and are designed to form a Faraday cage with an electrically conductive outer and non-conductive inner surfaces. This creates a Faraday shield, which acts like an invisible fence around sensitive electronic components, effectively blocking or absorbing radio signals that could cause interference or unwanted noise.

The 20S-CBSA-5.5X6.25X0.5 RF shield is designed for applications which require low noise levels, extremely low-loss EMI protection, and a very high level of electrical conductivity. The shield is constructed from four layers of 0.5mm thick copper-clad steel, resulting in an overall thickness of 2.5mm. The inner two layers are connected to the bottom surface for grounding purposes, and the outer two are connected to the shield\'s top surface for shielding purposes.

The shielding effectiveness of the 20S-CBSA-5.5X6.25X0.5 RF shield is accomplished by creating a Faraday cage which blocks or absorbs incoming electrical signals. The metal plates of the Faraday cage act like walls, blocking any signals from entering or leaving the area inside the shield. The Faraday cage also acts like a capacitor, storing up electrical charge until it is released in a controlled manner. This helps to reduce the amount of interference that can reach the electronics inside.

The 20S-CBSA-5.5X6.25X0.5 RF shield is designed for use in a wide range of applications, including audio, communications, automotive electronics, and networking systems. It is designed to protect against radio frequency interference (RFI) and noise from other electronic sources, such as cell phones, power lines, and data links. The shield is also highly effective at absorbing or blocking electromagnetic interference (EMI).

The 20S-CBSA-5.5X6.25X0.5 RF shield is a highly effective solution for EMI and RFI protection. The shield is constructed from copper-clad steel for excellent electrical conductivity, and the four-layered shield design ensures low noise levels and extremely low-loss EMI protection. The Faraday cage technology blocks or absorbs unwanted signals while allowing circuitry inside the shield to operate at desired levels. The 20S-CBSA-5.5X6.25X0.5 RF shield is a reliable choice for applications requiring excellent EMI and RFI protection.

The specific data is subject to PDF, and the above content is for reference