25AA256-E/MF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 25AA256-E/MF is a low-cost, easy-to-use, 16-Kbit, SPI serial EEPROM chip, part of the 25AAXXX family of devices. This family of devices is designed for general storage applications, and is capable of storing up to 16,384 bits of data (2K × 8-bit). The 25AA256-E/MF offers several features that make it ideal for general storage applications.

The 25AA256-E/MF is a nonvolatile memory device, meaning that the stored data is maintained even when power is removed, making it suitable for data retention in applications such as remote control systems, embedded systems, inventory management, medical and automotive. The 25AA256-E/MF can be programmed with a single byte and is capable of random reads and writes, allowing for fast data retrieval of stored information.

The 25AA256-E/MF has a 4096-byte array of 8-bit words in two blocks of 2048 bytes. Each word can be addressed directly, with 15 bits of addressing (8 blocks of 256 bytes) and a byte-wide data bus. Programming, erasing and reading can be performed byte-wise in the array. The 25AA256-E/MF device is offered as a small footprint package, allowing for easy integration into a variety of applications.

The 25AA256-E/MF is well suited for applications where a large data capacity, low cost and small form factor are necessary. It is a simple and reliable solution for storage or security of valuable data in a variety of applications. This device is also a suitable choice for getting fast data retrieval and data updating with minimum effort.

The 25AA256-E/MF has two control pins, --CE and --OE. The --CE pin is used to enable the chip and must be active (low) for the chip to be read or programmed. The --OE pin is used to enable the output. The 25AA256-E/MF is accessed either by serial data transfers (via the SPI interface) or by hardware control pins.

To program the 25AA256-E/MF, the --CE pin must first be brought low to select the device, followed by a write-enable command to the SPI interface. The device status must then be checked to ensure that the write-enable was executed correctly. Once the write-enable has been performed, data can then be written one byte at a time. After the write has been performed, the --CE pin must be brought back high to deselect the device.

To read data from the 25AA256-E/MF, the --CE pin must first be brought low to select the device, followed by a read-enable command to the SPI interface. The device status must then be checked to ensure that the read-enable was executed correctly. Data is then retrieved one byte at a time. After the read has been performed, the --CE pin must be brought back high to deselect the device.

The 25AA256-E/MF is an excellent solution for storage applications because of its low cost, large data capacity and small form factor. The device is easy to use and provides reliable data retention. This device also offers fast read times, allowing for quick data retrieval.

The specific data is subject to PDF, and the above content is for reference