25LC160B-E/P

Series:	--
Packaging:	Tube
Part Status:	Active
Memory Type:	Non-Volatile
Memory Format:	EEPROM
Technology:	EEPROM
Memory Size:	16Kb (2K x 8)
Clock Frequency:	10MHz
Write Cycle Time - Word, Page:	5ms
Memory Interface:	SPI
Voltage - Supply:	2.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C (TA)
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	25LC160B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 25LC160B-E/P is a serial EEPROM chip primarily used in applications requiring no or low write operations. This EEPROM is commonly used in consumer electronics and automotive applications. It is a Serial EEPROM made of a 16K bytes of memory, manufactured by Microchip, Inc. This product is a non-volatile memory device that is accessed through a two-wire interface (SPI). Additionally, the chip has an available EEProm programming interface and a convenient 16-pin SOIC package.

Application Field

The 25LC160B-E/P provides manufacturers with a versatile and cost-effective solution for embedded applications that require no or low write operations. Typical applications for the 25LC160B-E/P include embedded systems control, audio, automotive, consumer electronics, and industrial applications. One particular example of why the 25LC160B-E/P is used in automotive applications is for recalibration of certain vehicle components. The memory on the chip allows recalibration of certain components, such as sensors, to be done while the vehicle is in motion, without needing to be taken out of the vehicle.In consumer electronics, 25LC160B-E/P is used extensively to store product settings. For example, the Bluetooth settings in a headset or a sound system. The25LC160B-E/P provides a convenient and relatively low-cost solution for storing these settings.Other popular applications of the 25LC160B-E/P include encryption key storage, medical diagnostic systems, and safety features for robots.

Working Principle

The 25LC160B-E/P is accessed and programmed using a 2-wire serial interface using SPI. The chip communicates using the same protocol as many other SPI devices, such as the Serial Peripheral Interface Bus (SPI).The 25LC160B-E/P can be written to or read from by sending the appropriate instruction byte followed by one or more address bytes. The EEPROM can be either written independently to or read from, or the entire chip can be written to or read from.Writing to the 25LC160B-E/P is done by writing the byte to be stored in the memory to the EEPROM address in the 25LC160B-E/P that it is to be stored. Then the write command is issued, which will program the byte into the EEPROM.Reading from the 25LC160B-E/P is done by sending the read command with the address of the byte to be read. The byte stored in the corresponding memory address in the 25LC160B-E/P will then be read and sent to the user.Once the data has been written to the 25LC160B-E/P, it will remain stored in the EEPROM until it is intentionally overwritten or erased. The data will also remain stored in the EEPROM even when there is no voltage applied.

Conclusion

The 25LC160B-E/P is a cost-effective serial EEPROM chip that is used extensively in a variety of applications requiring no or low write operations. It is an ideal solution for embedded systems control, audio, automotive, consumer electronics, and industrial applications. The 25LC160B-E/P is accessed and programmed using a 2-wire serial interface using SPI. Writing to the 25LC160B-E/P is achieved by writing the byte to be stored into the appropriate EEPROM address. Reading from the 25LC160B-E/P is done by sending the read command to read the byte stored in the corresponding memory address. The 25LC160B-E/P is an excellent choice for embedded applications that require no or low write operations.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description