25YXJ47MCC5X11

Series:	YXJ
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	47µF
Tolerance:	±20%
Voltage - Rated:	25V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	5000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	137.5mA @ 120Hz
Ripple Current @ High Frequency:	250mA @ 100kHz
Impedance:	400 mOhms
Lead Spacing:	0.079" (2.00mm)
Size / Dimension:	0.197" Dia (5.00mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors, also known as electrolytic capacitors, are passive electronic components that use an electrolyte to store electric charge. They have a wide range of applications in electronics, ranging from power supply filtration, back-up power for RAM, energy-saving motors, medical equipment, high table modeling amplifiers, audio equipment, and instrumentation. The 25YXJ47MCC5X11 aluminum electrolytic capacitor is an example of a typical type of electrolytic capacitor.The 25YXJ47MCC5X11 aluminum electrolytic capacitor has a wide range of applications in both audio and medical equipment. In audio equipment, this capacitor is used for signal storage, crossover/equalization, and power supply filtration. In medical equipment, they are commonly used as an energy source to power medical instruments.The 25YXJ47MCC5X11 aluminum electrolytic capacitor is composed of two aluminum plates that are separated by an electrolyte. The two aluminum plates are covered in a dielectric, which acts as an insulator so that electric charge on one side is not transferred to the other. The electric charge is stored in the electrolyte, which is located between the two aluminum plates.The working principle of this capacitor involves the charging and discharging of the two aluminum plates. When the capacitor is connected to a power source, electric charges are stored in the electrolyte. During the discharging process, the electric charges stored in the electrolyte are released and transferred to the two aluminum plates, thus creating an electrical current.Aluminum electrolytic capacitors are widely used in a wide variety of consumer electronic products due to their high capacitance, long life, low cost, and lightweight nature. The 25YXJ47MCC5X11 is a great example of a typical aluminum electrolytic capacitor and its wide range of applications in both audio and medical electronics.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description