30D107G050DF5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor that uses a thin layer of oxide on aluminum foil as a dielectric. The oxide layer acts as an insulator, allowing the capacitor to store energy. This type of capacitor is often used in applications where high capacitance is required, such as power supply filtering, charge pump circuits, and signal buffering. The 30D107G050DF5 is an example of an aluminum electrolytic capacitor.

The 30D107G050DF5 is an electrolytic capacitor with a capacitance of 10µF and a maximum voltage of 50 volts DC. It has a maximum ripple current of 7A and a maximum temperature rating of 105°C. The 30D107G050DF5 has an operating life of 5000 hours at +105°C. Its lead spacing is 5mm ±0.25mm and the case size is 30mm diameter. The 30D107G050DF5 is rated for an environmental temperature range of -25°C to +105°C.

There are a wide range of applications for the 30D107G050DF5. It can be used in power supply filters to reduce noise and ripple caused by the supply voltage. It can also be used in charge pumps and signal buffering applications. In addition, it can be used as a snubber capacitor for AC or DC switching power supplies, as well as in high-frequency circuits and high-speed data systems. The 30D107G050DF5 can also be used in general-purpose capacitive-coupling and bypassing circuits.

The working principle of the 30D107G050DF5 is based on the same principle as all other aluminum electrolytic capacitors. The oxide layer on the aluminum foil acts as an insulator, allowing the capacitor to store electrical energy. When voltage is applied to the capacitor, electrical charges flow through the oxide layer onto the foil, causing a distribution of charges on each side of the oxide layer. The electrical energy is stored when the electrons move from the positive side of the foil to the negative side of the foil. This is known as an accumulation layer, and it is this layer that stores the electrical charge.

When the voltage applied to the capacitor is removed, the charges stored in the accumulation layer are released. This is known as a discharge layer. This discharge layer returns the charges back to the original distribution across the foil. This process allows the capacitor to store and release energy quickly, making it ideal for high-frequency applications.

In conclusion, the 30D107G050DF5 is an aluminum electrolytic capacitor with a wide range of applications. It has a capacitance of 10µF and a maximum voltage of 50 volts DC. The 30D107G050DF5 uses a thin layer of oxide on aluminum foil as a dielectric, allowing the capacitor to store electrical charges and release them quickly. It is an ideal choice for power supply filtering, charge pumps, signal buffering, AC or DC switching power supplies, high-frequency circuits, and high-speed data systems.

The specific data is subject to PDF, and the above content is for reference