332111

Frequency - Max:	3GHz
Insertion Loss:	0.05dB
Mating Cycles:	500
Center Contact Material:	Beryllium Copper
Operating Temperature:	-40°C ~ 85°C
Dielectric Material:	Polytetrafluoroethylene (PTFE)
Center Contact Plating:	Silver
Body Finish:	White Bronze
Body Material:	Brass
Includes:	--
Ingress Protection:	--
Housing Color:	Silver
Features:	Low PIM
Number of Ports:	1
Series:	--
Fastening Type:	Threaded
Cable Group:	1/2" Helical
Mounting Feature:	--
Mounting Type:	Free Hanging (In-Line)
Impedance:	50 Ohm
Shield Termination:	Clamp
Contact Termination:	Push On
Connector Type:	Jack, Female Socket
Connector Style:	4.1/9.5
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) and Their Application Field and Working PrincipleCoaxial connectors (RF) are widely used in a variety of applications nowadays. Their application field includes most of the fields of communication, like internet telecommunication, television, mobile phones, satellite TV, and radar equipment. The field of RF connectors has seen an increased demand from all of these areas. In addition, RF connectors can also be used in the radio and industry for their ability to provide reliable and easy connection in signal transmission.Coaxial connectors are the most commonly used type of connector. They are designed to provide uniform impedance and to connect signals of the same time and frequency. RF connectors consist of two or three connectors arranged in a circle shape, with a center conductor extending from one end of the connector to the other. The center conductor is usually made of copper or steel, while the outer conductors are plastic or metal. The outer conductors are usually insulated with a dielectric material to allow for the connection of an antenna or other electrical elements.There are two main types of RF connectors: male and female. Male connectors have a center pin that protrudes from the side of the connector, while female connectors have a recessed center pin. A male connector can only be used with a female connector, and vice versa.The working principle of RF connectors is based on the concept of impedance matching. This allows for signals of the same frequency to travel through the connectors with little or no interference. The center conductor of an RF connector is typically coated with a dielectric material, which creates an insulation layer or "dielectric boot". This insulating boot is designed to minimize electrical capacitance or inductance that can interfere with signal transmission.When connecting two devices together, RF connectors must be properly aligned to ensure maximum performance. The connectors should be matched as closely as possible to provide the most effective connection, and to prevent any damage from occurring. The connectors should also be clean and dry, and free of any dirt or debris that could interfere with signal transmission.In addition to their application and working principle, RF connectors have other important features. They offer a wide range of sizes and types, so they can fit almost any application. They also have a high degree of reliability and are generally immune to moisture, dust, and other contaminants. They are also inexpensive and easy to install and replace.In conclusion, RF connectors are an integral part of any RF communication system, and they are used in a variety of applications. They offer a reliable and easy connection that is designed to provide uniform impedance and signals of the same frequency and time. They also have a range of sizes and types that fit most applications, as well as features that make them highly reliable and inexpensive to install and replace.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description