35YXG220MEFCT810X12.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used electronic components found in a range of devices from phones to computers to home appliances. They are traditionally much larger in size than other types of capacitors and contain an anode composed of aluminum foil and a paper spacer saturated with electrolyte, along with liquid or solid electrolyte for capacitance stabilizing. This makes them particularly useful in high-frequency applications.

The 35YXG220MEFCT810X12.5 is an aluminum electrolytic capacitor of the series YXG 5, 6 and 8 that follows the YXG series standard, using the classic design and construction of a screw terminal, pressurized dielectric fluid, a tape wrap for additional protection, and a foam pad for insulation. The 35YXG220MEFCT810X12.5 exhibits a voltage rating of 310 volts, capacitance of 220μF, and temperature range of -55°C to +85°C.

The 35YXG220MEFCT810X12.5 is designed to provide superior performance over other aluminum electrolytic capacitors, offering a wide capacitance range of 10 to 2000μF with improved ripple current capability and reduced voltage lower ESR rates, higher capacitance-voltage ratings, and increased reliability and thermo-resistance. It is therefore ideal for use in audio, power amplifiers, switching power supplies, and motor-control applications.

The primary principle of operation is that of conventional electric double-layer capacitance. This is achieved by having two electrodes separated by a dielectric material, such as aluminum foil. The electric current passing through these electrodes causes the electric field to cause the positive and negative charges to accumulate on the surfaces of the electrodes. The ratio of charge accumulation to electric field strength in the electrolyte determines the capacitance of the capacitor.

The 35YXG220MEFCT810X12.5 is constructed with an aluminum oxide layer that serves as the dielectric material between the plates, and a conductive gel layer that acts as a separator. The electrodes that produce the electric double-layer are the positive plate, made of aluminum foil, and the negative plate, composed of a porous material. The separator prevents the electric charge from leaking from the plates and helps to improve the insulation of the component.

The 35YXG220MEFCT810X12.5 is then surrounded by an insulating material and sealed in a can. The can is filled with a liquid or solid electrolyte, which acts as an electrical bridge between the terminals. As current passes through the electrolyte, electrolysis occurs, breaking down the liquid or solid and releasing positively- and negatively-charged ions. These ions are attracted to the positive and negative plates and create the electric double-layer.

The 35YXG220MEFCT810X12.5 is also designed to be used in a dual-voltage operating environment. This is achieved by using a negative voltage that is equal to or lower than the positive voltage, and using a protective circuit to limit the rate of current flow. This prevents the voltage from exceeding the rated voltage of the component.

The 35YXG220MEFCT810X12.5 is an aluminium electrolytic capacitor designed for applications requiring high capacitance ratings and high stability. Its wide capacitance range, superior performance, and extended temperature range make it an ideal choice for use in audio, power amplifiers, switching power supplies, and motor-control applications.

The specific data is subject to PDF, and the above content is for reference