35ZLJ560MT810X20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

An aluminum electrolytic capacitor is a capacitor that uses an aluminum oxide film as the dielectric. This type of capacitor has good characteristics such as a high capacitance-to-weight ratio, high frequency response, and low ESR (equivalent series resistance). It is the most commonly used capacitor in modern electronics.

Features of Aluminum Electrolytic Capacitors

Compared with other types of capacitors, aluminum electrolytic capacitors have the following features:

• Higher capacitance-to-weight ratio
• Low ESR (equivalent series resistance)
• High frequency response
• Low loss under AC conditions
• Small size
• Good performance and durability

Types of Aluminum Electrolytic Capacitors

There are three types of aluminum electrolytic capacitors: Non-solid organic capacitors, Solid organic capacitors, and Polymer capacitors.

• Non-solid organic capacitors: These capacitors use an electrolyte of liquid or paste to form an electric field between two metal plates. The aluminum oxide film is thin and can provide large capacitance values within a small size.
• Solid organic capacitors: These capacitors use an electrolyte of a polymer composite material. They are more durable and less susceptible to environmental factors such as temperature and humidity.
• Polymer capacitors: These capacitors use a polymer electrolyte that is more conductive than organic electrolytes. They offer the highest capacitance values within a given size range and have the highest frequency response of all aluminum electrolytic capacitors.

35ZLJ560MT810X20 application field and working principle

The 35ZLJ560MT810X20 is an aluminum electrolytic capacitor designed for use in high frequency applications. It is composed of two metal plates (anode and cathode) separated by a thin layer of aluminum oxide that acts as the dielectric. The anode and cathode are typically made of aluminum and the electrolyte is usually a formulation of organic solvent, acidic compounds, and metallic salts.

When voltage is applied, the electric field between the two plates causes the oxide layer to break down allowing for current to flow. This generates an electric charge which is stored in the capacitor. The energy stored is what is used to provide the electrical power for power supply systems and other high frequency applications.

The 35ZLJ560MT810X20 aluminum electrolytic capacitor is designed for use in applications such as consumer electronics, automotive electronics, and telecommunications. It is highly reliable and serves as a cost-effective solution for high frequency power supply applications.

The specific data is subject to PDF, and the above content is for reference