42A36-01-2-02N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary switches are widely used in control and switching circuits for homes, industrial, and commercial applications. A rotary switch is a device that is operated by rotating a shaft to allow for selection between multiple electrical circuits. The 42A36-01-2-02N is a rotary switch featuring a plastic housing and is suitable for the switching of high currents up to 12 A. It consists of two wafers that when rotated relative to each other, the contact points interact to provide a wide variety of switch positions. This type of switch has an operating limit of 250operations. The 42A36-01-2-02N has various application fields including controlling fans, lights, pumps, and other equipment in industrial and commercial buildings, as well as residential dwellings. In these applications, it is generally used in place of push buttons or toggle switches to initiate a circuit.

The 42A36-01-2-02N works on a principle that uses the interaction between two wafers inside the plastic housing. These wafers are mounted on an axis to allow for rotation relative to each other. When the switch is in the “off” position, the contact points on the wafers do not make contact with each other. When the switch is rotated, the contact points on the wafers come into contact, thus completing a circuit. The position of the contacts determines whether the circuit is opened or closed. This type of switch is known as an “on-off” switch, as it can only open or close a circuit.

The 42A36-01-2-02N is designed to be easy to install and operate. It is a single pole switch, meaning that it can control only one circuit. The number of poles is determined by the number of contact points on the wafers. The 42A36-01-2-02N has four contact points, allowing it to provide up to four switch positions. This type of switch is typically used in applications that require three or four switch positions.

The 42A36-01-2-02N is typically used in a closed-loop circuit, often referred to as a latching circuit. This type of circuit stays in the same state until changed by the user. When the switch is rotated, the contacts open to disconnect one side of the circuit, and then close to connect the other side. This allows the user to select between different configurations of the circuit.

The 42A36-01-2-02N is a versatile rotary switch well-suited for a wide range of applications. The high current capacity and latching circuit configuration make it well-suited for controlling fans, lights, pumps, and other equipment in a variety of industrial and commercial applications. This type of switch is a reliable and cost-effective way to control electrical circuits.

The specific data is subject to PDF, and the above content is for reference