4310R-104-161/241L

Number of Pins:	10
Height - Seated (Max):	0.195" (4.95mm)
Size / Dimension:	0.984" L x 0.085" W (24.99mm x 2.16mm)
Supplier Device Package:	10-SIP
Package / Case:	10-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4300R
Resistor-Ratio-Drift:	50 ppm/°C
Resistor Matching Ratio:	--
Number of Resistors:	16
Tolerance:	±2%
Resistance (Ohms):	160, 240
Circuit Type:	Dual Terminator
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are an important part of electrical and electronic circuits. They can be used to provide precise resistance values and/or provide certain electrical characteristics such as filtering and voltage division. The 4310R-104-161/241L resistor network is one such example. It is a four-terminal, precision resistor array manufactured by the Vishay Corporation that provides a resistor value of 4.7kΩ with a tolerance of ± 5%.This type of network is often used in circuits that require precision resistors. It is especially useful in systems that require a number of resistors with the same value and tolerance. This network is unique because it has four terminals instead of the typical two. This provides more flexibility and allows multiple resistance values to be adjusted by simply adjusting the voltage applied to the terminals.The 4310R-104-161/241L resistor network works by adjusting the values of a pair of 4.7kΩ resistors. The resistor values are adjusted by varying the voltage applied to the two terminals. When the voltage is below the minimum threshold, the resistors provide a value of 4.7kΩ. When the voltage is in the optimal range, the values of the two resistors can be adjusted to provide a tolerance of ± 5%.The resistance value of the 4310R-104-161/241L resistor network is determined by the resistance of the individual resistors and the amount of current that passes through them. The resistance of the resistors is determined by the voltage applied between the two terminals. By decreasing the voltage, the resistance of the resistors increases. Conversely, by increasing the voltage, the resistance of the resistors decreases. As the resistance of the resistors changes, the amount of current that passes through them changes. This changes the overall resistance of the network.The 4310R-104-161/241L resistor network is used in many circuits where precise resistances and/or specific electrical characteristics are needed. This includes signal processing, audio and video production, electronic instrumentation, and power supply systems. The network is also used in datasheet applications where multiple resistors with similar values and tolerances are required.The resistor network is constructed from four resistors, but the exact configuration is not known. The two outermost resistors are presumably the 4.7kΩ resistors, and the two inner resistors are likely in a bridge circuit or a Wheatstone bridge. This configuration is a type of voltage division circuit and allows the resistance of the two inner resistors to be adjusted.When the 4310R-104-161/241L resistor network is used in a circuit, the two outermost resistors must be connected to the power source. Depending on the desired resistance value, the voltage applied to the two inner resistors can then be adjusted. This allows the resistor network to provide a precise resistance value ± 5%.The overall resistance value of a resistor network depends on the resistance of each individual resistor and the amount of current that passes through them. This means that resistor networks are not as affected by changes in temperature as individual resistors. This makes them well suited for environments where temperature is an issue, such as in high-powered electronics.In conclusion, the 4310R-104-161/241L resistor network is a four-terminal, precision resistor array designed to provide a value of 4.7kΩ with a tolerance of ± 5%. It can be used in a variety of applications where multiple equivalent resistors are needed, such as signal processing, audio and video production, electronic instrumentation, and power supply systems. The network is ideal for use in environments where temperature is a concern as it is less affected by changes in temperature than individual resistors.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description