4613X-101-105LF

Number of Pins:	13
Height - Seated (Max):	0.200" (5.08mm)
Size / Dimension:	1.298" L x 0.098" W (32.97mm x 2.49mm)
Supplier Device Package:	13-SIP
Package / Case:	13-SIP
Mounting Type:	Through Hole
Applications:	--
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±100ppm/°C
Power Per Element:	200mW
Series:	4600X
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	12
Tolerance:	±2%
Resistance (Ohms):	1M
Circuit Type:	Bussed
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

A 4613X-101-105LF resistor network is one of many types of resistors that can be used in a wide variety of applications. It is a low-noise four or eight-element integrated array of resistors. This type of resistor is ideal for applications requiring multiple or single-chip designs. A 4613X-101-105LF resistor network connector offers low noise and low power consumption. Its high impedance characteristics make it suitable for designs that include small signal conditioning and other low-noise applications. It is also an excellent choice for applications such as filter networks, attenuators, and frequency-dependent networks.The working principle of the 4613X-101-105LF resistor network is based on its array structure. This type of resistor combines individual resistors and arrays them in a way that creates a balance of resistance and performance. The array design allows for the addition of resistors to the network as well as connected components such as capacitors and inductors. The 4613X-101-105LF resistor network can be used in many different types of applications. It is a great choice for designs that require large amounts of current, such as sensor designs. It is also an ideal solution for designs requiring filtered signal conditioning, since it provides low-noise impedances for signals and offers excellent signal-to-noise ratios. Other applications for the 4613X-101-105LF resistor network include precision control, signal conditioning, and mixed-signal circuits such as analog-digital converters. The components of the 4613X-101-105LF resistor network include the resistor, the appropriate protective resistor, the bypass capacitors, and the series connection leads. The resistor network can be used in two ways. It can be wired in a series configuration (with one resistor connected to each other, forming a single chain) or a parallel configuration (with each resistor connected in double rows). The series configuration is more common and offers a higher level of performance, while the parallel configuration is more cost-efficient and requires less power. The protective resistor is important for preventing short circuit damages and for ensuring good circuit isolation. The bypass capacitors are necessary to provide the low-noise impedance required by many signal conditioning applications. The series connection leads are used to connect the array of resistors and other components, including capacitors and inductors, to the appropriate points on the circuit board. The 4613X-101-105LF resistor network is an excellent choice for many applications. Its low-noise capabilities make it an ideal choice for applications such as filter networks, signal conditioners, and other low-noise components. Its cost-efficiency also makes it an attractive choice for those looking for a reliable and affordable resistive network.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description