4N26M_F132

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are used in many electronics applications to provide electrical isolation between a sensor or controlling device and an electrical circuit. The 4N26M_F132 Optoisolator is a type of optoisolator that uses a light emitting diode (LED) optically coupled to a phototransistor to provide electrical isolation. This type of optoisolator is used in applications where the response time is critical or the circuit is sensitive to electrical noise.

The 4N26M_F132 optoisolator is specified for collecting data, converting frequencies, switching or invert signals among other applications. It has a fast response time of 10µs and can handle up to 30V and current up to 10mA. It is also designed for very low power dissipation in order to meet the requirement of embedded systems.The 4N26M_F132 optoisolator has an LED with three leads- ground, supply voltage and output voltage. The other three pins are the collector, emitter and base terminal of the phototransistor. The collector and emitter leads are used to connect the output circuit and the base pin is used to connect the input circuit.

The 4N26M_F132 optoisolator works by providing an electrical isolation barrier between two circuits. When the LED is forward biased, it emits light which is then picked up by the phototransistor. This causes the phototransistor to turn on, providing a current path between its collector and emitter terminals. This allows the collected signal to be passed through to the output circuit. This optoisolator can be used in circuits where high electrical noise is present as it will provide a physical barrier between the input and output circuits.

The 4N26M_F132 optoisolator is used in a wide variety of applications. It is typically used in motor control circuits, automotive applications, robotics, aircraft systems, and communication systems. It can also be used in industrial automation processes and machine-to-machine communication. This optoisolator is suitable for use in high-speed digital systems as it has a fast response time. It can also be used in circuits where there is a need for electrical isolation between input and output signals.

The 4N26M_F132 optoisolator is a reliable, fast, and cost-effective solution for providing electrical isolation between two circuits. Its fast response time and low power consumption make it ideal for use in embedded systems. It is also suitable for use in high-speed digital circuits and in applications where there is a need for electrical isolation.

The specific data is subject to PDF, and the above content is for reference