50YXM22MEFCT15X11

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

50YXM22MEFCT15X11 belongs to a series of aluminum electrolytic capacitors and it has been widely used in various applications, such as industrial electronics and automotive industry. These capacitors possess excellent performance and characteristics which make them highly efficient. It consists of two aluminum electrodes and an electrolyte solution, where the electrolyte acts as a conducting agent. The two electrodes will be connected to two separate poles and thus forming a closed circuit. This closed circuit will have a certain amount of resistance and capacitance which will determine its performance characteristics.

Structure

The general structure of the 50YXM22MEFCT15X11 capacitor consists of two aluminum foils, the cathode and the anode, and an electrolyte, as shown in Figure 1. The anode consists of a layer of anodized aluminum foil, which acts as a permeable barrier between the non-conductive oil and the electrolyte. Furthermore, the anode is covered by an absorbent paper impregnated with a conformal coating, to protect it from corrosion. The cathode consists of a conductive oil-impregnated paper, sandwiched between the anode and the electrolyte. The resistance of this liquid-electrolyte interface is quite low, and its capacitance is said to be very high.

Working Principle

The working principle of the 50YXM22MEFCT15X11 capacitor is based upon the charging and discharging of capacitors in an AC circuit. A positive and negative voltage is applied to the two plates, the anode and cathode. This causes electrons to move to the anode and holes to move to the cathode. This creates a voltage gradient between the two plates and a charge is stored in the capacitor which can be released again when a higher voltage is applied. The stored charges in the capacitor will balance with the induced current from the AC circuit, therefore the voltage and current at the terminals will remain constant.

Applications

50YXM22MEFCT15X11 have many applications in the industrial, automotive, and consumer electronics industry. Some of these are:

• Oil pumps in automobiles
• DC-DC converters in the automotive industry
• Industrial equipment, such as UPS systems and high-voltage inverters
• Lead-acid battery chargers
• Power supplies in consumer electronics such as laptops, computer monitors, and home theaters
• Lighting ballasts

Advantages

The 50YXM22MEFCT15X11 capacitor has many advantages. Firstly, it has a very high capacitance, which is capable of storing large amounts of charge in a small form factor. Furthermore, it has a low internal resistance, which allows for higher current flow when discharging the stored charge. Additionally, the 50YXM22MEFCT15X11 capacitor has a long life span, with a very low leakage current value. Lastly, it is highly reliable, with a temperature coefficient of -15mV/K.

Conclusion

The 50YXM22MEFCT15X11 capacitor belongs to the family of aluminum electrolytic capacitors. It is a cost-effective, easily available, and highly reliable capacitor with a wide range of applications in the industrial, automotive, and consumer electronics market. Its high capacitance and low internal resistance make this capacitor ideal for use in various applications, such as oil pumps in automobiles, industrial equipment, lead-acid battery chargers, and many others.

The specific data is subject to PDF, and the above content is for reference