517D476M016JA6AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are often referred to as "electrolytic capacitors" or "electrolytics". They consist of two metal oxide layers separated by an electrolyte material, and are usually the largest component of a circuit.

The 517D476M016JA6AE3 is an aluminum electrolytic capacitor. It is a type of polarized capacitor with an anode (positive) and a cathode (negative). Aluminum electrolytic capacitors are known for being high voltage, but low capacitance. This particular capacitor is a very high voltage capacitor, rated at a maximum voltage of 450V. It’s capacitance is 47µF, with a tolerance of 20%.

Aluminum electrolytic capacitors are used in a variety of applications. They are commonly used for smoothing circuit noise, as part of a filter capacitor, and for power supply filtering on AC line circuits. They are also used in frequency-dependent circuits, such as resonant circuits. They are also used for load balancing, decoupling, and bypassing across a wide range of frequency.

The 517D476M016JA6AE3 is designed to be used in low-noise power supplies and signal filters, as well as circuits that require large capacitance in a small package. It is commonly used in high-end audio equipment, LED lighting circuits, security systems, and automotive electronics.

The working principle of aluminum electrolytic capacitors is based on a two-layer metal plate system. The first layer is a porous metal plate which is coated with an anion-containing electrolyte. The other layer consists of a metal layer which is solid and contains an anion-containing electrolyte. The two metal plates have equal and opposite charges. When a voltage is applied across the layers, the electrolyte ions flow between the two plates and form the capacitance of the device. This process is known as double layer capacitance. The capacitance of the device is proportional to the applied voltage and the size of the plates.

The aluminum electrolytic capacitor is also designed to have a high self-discharge rate. This is especially important in low-noise power supplies and signal filters. It ensures that the capacitor will discharge quickly and remain at a low capacitance level after the applied voltage is removed. This ensures that the power supply will remain clean and noise-free even when the voltage is removed.

The 517D476M016JA6AE3 is an aluminum electrolytic capacitor designed to provide reliable operation in a wide variety of applications. It has a high maximum voltage rating, a low capacitance, and a high self-discharge rate. It is suitable for use in low-noise power supplies and signal filters, LED lighting circuits, security systems, and automotive electronics.

The specific data is subject to PDF, and the above content is for reference