52-CBSA-4.75X5.75X0.5

Series:	50-CBS
Packaging:	Bulk
Part Status:	Active
Type:	Shield, 2-Piece
Height - Overall:	0.500" (12.70mm)
Length - Overall:	5.750" (146.05mm)
Width - Overall:	4.750" (120.65mm)
Ventilation:	Vent Holes in Pattern
Mounting Type:	Through Hole

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Shields:
RF shields are products used to block external electronic signals in order to protect the RF system from interference. They are primarily used in applications such as medical equipment, equipment control, and circuit designs. In this article, we will look at the 52-CBSA-4.75X5.75X0.5 application field and working principle and discuss how it can be used.
The 52-CBSA-4.75X5.75X0.5 is a type of RF shield designed for medium-frequency applications. It is constructed from multiple layers of metal with a dielectric material in between to provide additional protection from both radiated emissions and conducted interference. The shield is then die-stamped with either conductive or non-conductive panels. This is intended to provide a uniform, regulated, and consistent application performance when used in combination with a bulkhead connector.
The working principle of the 52-CBSA-4.75X5.75X0.5 RF shield relies on two basic elements: the shielding effect and the impedance match. The shield uses the Faraday Cage principle, which essentially states that any electromagnetic field will be short-circuited when placed within a metal enclosure. This will prevent any external signals from entering the chamber, and any signals inside the chamber will be reflected back towards their source. The impedance match is also required to ensure the shield works properly. The two dielectric layers of the shield will have different impedances, so they must be matched in order for the shield to work properly.
The primary applications of the 52-CBSA-4.75X5.75X0.5 RF shield include medical equipment, electronic circuits, aerospace and defense, automotive, and instrumentation. In medical equipment, the RF shield is used to ensure the device remains shielded from unwanted interference. This helps to improve the signal integrity and reliability of the device. In electronic circuits, the RF shield can be used to provide a physical barrier between the circuit and the external environment. This helps to protect the circuit from non-ionizing radiation and other interference. In instrumentation, the shield can help to provide a low-noise environment, which helps to improve the accuracy and repeatability of the measurements. In aerospace and defense, the shield can be used to provide a physical barrier between the sensitive equipment and external radiation, which helps to protect the internal workings of the system. The RF shield can also be used in automotive applications to protect the electronic components from external interference.
Overall, the 52-CBSA-4.75X5.75X0.5 RF shield is a highly reliable and effective solution for reducing the unwanted electromagnetic interference that can affect many applications. With its multiple layers of metal and dielectric material, it provides a uniform and consistent application performance. It is also designed for use with a bulkhead connector and has a wide range of primary applications, such as medical equipment, electronic circuits, instrumentation, aerospace and defense, and automotive.

The specific data is subject to PDF, and the above content is for reference