534CB000235DG

Function:	Enable/Disable
Current - Supply (Disable) (Max):	75mA
Package / Case:	8-SMD, No Lead
Height:	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Current - Supply (Max):	88mA
Operating Temperature:	-40°C ~ 85°C
Frequency Stability:	±20ppm
Voltage - Supply:	3.3V
Output:	CMOS
Series:	Si534
Frequency - Output 4:	24.576MHz
Frequency - Output 3:	22.5792MHz
Frequency - Output 2:	16.384MHz
Frequency - Output 1:	12.288MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable OscillatorsOscillators are a type of electronic component which uses feedback to produce an output signal usually at a certain frequency. They are used in a wide range of applications, from timing and frequency control in various electronic devices through to signal generators. One type of oscillator is the pin configurable/selectable oscillator, such as the 534CB000235DG.The 534CB000235DG is a high performance, 7-pin CMOS programmable oscillator with pin selectable frequency and output configuration. It can be programmed to provide a wide range of operating frequencies, from 100kHz to 100MHz. It is designed to provide a stable and accurate clock signal with low jitter and low power consumption. It is ideal for applications where cost and board space are an issue, as the device can be programmed to generate multiple outputs from a single device.One of the key features of the 534CB000235DG is its ability to be pin selectable. This allows for quick selection of the frequency range, output type (square wave, sine wave etc.) and output level (high/low). With most oscillator parts, once the frequency and output settings are set, any changes require the parts to be completely replaced. With pin selectable oscillators such as this one, however, the frequency and settings can be changed quickly and easily with no need to replace the parts. This reduces cost and gives flexible control over the settings.The 534CB000235DG operates in a range of temperatures, from -40°C to +85°C, and is designed to operate in a wide range of voltage and load conditions. This makes it suitable for a wide range of applications, such as timing and frequency control in digital systems, motor control and synchronization, test instrumentation and RF data systems.The 534CB000235DG uses a combination of crystal and silicon oscillator circuit design to achieve its high performance. It uses a two metal layer construction and a hybrid silicon chip to ensure optimal thermal stability and accuracy. It also uses on-chip trimming and calibration for fine tuning of frequency, phase noise, jitter and output level.In conclusion, the 534CB000235DG is a high performance, 7-pin CMOS programmable oscillator with pin selectable frequency and output configuration. It is ideal for applications where cost and board space are an issue, as the device can be programmed to generate multiple outputs from a single device. The device features on-chip trimming and calibration for fine tuning of frequency and output level, making it suitable for a wide range of applications and allowing for flexible control over the settings.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description