550ME000215DGR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators play a vital role in several electronic circuits as it creates a rhythmic or repetitive electrical signal or waveform. Oscillation usually involves electric and electronic components like in case of voltage and current, both changes continuously in a periodic fashion. The most common type of oscillators are the LC Oscillator, Clock Oscillator, Pierce Oscillators, and the 550ME000215DGR oscillator.The 550ME000215DGR oscillator is a widely used solution for frequency control and clock generation. It is a miniaturized surface mount oscillator with an industry-standard foot print and simple configuration. With a frequency range from 20 MHz to 74 MHz, the oscillator is ideal for use with microprocessors, bus clock oscillators, cross-point switches, or any other RSFrequency dependent circuits. This oscillator is powered by a 1.65V to 3.6V DC supply and offers low jitter a spread spectrum of no more than 2%.

The working principle behind the 550ME000215DGR oscillator is based on a resonator, either a quartz crystal or a surface acoustic wave (SAW) device. The oscillator produces an output signal that is determined by the resonator. The resonator also acts as a filter, to ensure that only the desired frequency is output. In a typical oscillator circuit, an oscillator circuit has two feedback components, the resonator and an amplifier. The amplifier will amplify the output signal of the resonator and provide the feedback for the oscillator to remain in operation.

The 550ME000215DGR oscillator is primarily used in consumer electronic devices such as cellular phones, laptops, and tablet computers. It is also used extensively in industrial applications, including high-end medical imaging equipment, automotive electronics, and industrial control systems. It is also used in network control servers, as well as telecommunications, aerospace, and defense systems. It is an ideal oscillator for timing and frequency control applications, due to its low jitter and wide frequency range.

In summary, the 550ME000215DGR oscillator is a reliable, commonly used solution for frequency control and clock generation. It is a miniaturized surface mount device that is powered by a 1.65V to 3.6V DC supply. The device offers low jitter and a spread spectrum of no more than 2%. It is primarily used in consumer electronic devices such as cellular phones, laptops, and tablet computers, as well as in industrial applications, including high-end medical imaging equipment, industrial control systems, and automotive electronics.

The specific data is subject to PDF, and the above content is for reference