Allicdata Part #: | #5HT-36020AS-360-ND |
Manufacturer Part#: |
#5HT-36020AS-360 |
Price: | $ 8.11 |
Product Category: | Filters |
Manufacturer: | Toko America Inc. |
Short Description: | FILTER HELICAL 360MHZ TYPE 5HT |
More Detail: | N/A |
DataSheet: | #5HT-36020AS-360 Datasheet/PDF |
Quantity: | 303 |
1 +: | $ 7.37730 |
10 +: | $ 7.23744 |
25 +: | $ 7.09534 |
250 +: | $ 6.95344 |
Series: | 5HT |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency - Center: | 360MHz |
Bandwidth: | 16MHz |
Selectivity: | 25dB (+50MHz) 33dB (-50MHz) |
Ripple: | 1dB |
Insertion Loss: | 4dB |
Mounting Type: | Through Hole |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Helical filters are electronic components used to remove undesired high frequency signals, while passing those signals of desired frequency. Along with low pass filters, helical filters are widely used to remove noise from transmission lines, especially in radio frequency and microwave frequency applications. #5HT-36020AS-360 is one of the commonly used helical filters. This article will discuss the application field and working principle of the #5HT-36020AS-360.
The #5HT-36020AS-360 helical filter is designed for use in communication systems and consumer products, such as military communication, navigation communication, law enforcement communication, radio broadcasting and other high-bandwidth data transmission systems. This filter is also rated for use in high bandwidth, low power transmission systems, such as GSM and Wi-Fi. In addition, the #5HT-36020AS-360 helical filter is also designed to limit noise and harmonics in DC and AC power systems.
In addition to the application fields, it is also important to understand the working principle of the #5HT-36020AS-360 helical filter. The working principle of the #5HT-36020AS-360 filter lies in its particular milled wire design. It works by limiting the range of frequencies that can enter or exit the device. This range is specified by the design of the filter coils. The filter coils are designed using a specific mathematical formula called the Transfer Function, which is used to calculate the transmission coefficient of the helical filter.
The #5HT-36020AS-360 helical filter is comprised of two coils, which form the basic structure of the filter. The coils are wound in a helical pattern and are designed to create a gap between adjacent coils to allow signals to be transmitted through the device. Specifically, the number of turns in the coil determines the range of frequencies that can pass through the filter. The more turns in the coil, the higher the frequency range that can pass through the filter. The number of turns in the coil is also related to the Cutoff Frequency, which is the point at which the filter begins to reduce common mode noise and hence limit the range of frequencies that can pass through the filter.
In addition to the coils, the #5HT-36020AS-360 filter also features a resistor and a capacitor, which are designed to further reduce common mode noise. The capacitor prevents the signal from reaching the resistor, which effectively reduces the common mode noise. The capacitor and resistor are bundled together into a single package, which is then attached to the coils. This package is known as the coupling network, which is responsible for reducing common mode noise and further limiting the range of frequencies that can pass through the filter.
Finally, the #5HT-36020AS-360 helical filter features a temperature compensation system, which further reduces noise and increases the effectiveness and stability of the filter. The temperature compensation system works by using high temperature resistant resistors and capacitors, which prevent the signal from being affected by high temperatures. By using these components in conjunction with the coils, the #5HT-36020AS-360 filter is able to reduce common mode noise and further limit the range of frequencies that can pass through the filter.
To summarize, the #5HT-36020AS-360 helical filter is an ideal choice for filtering unwanted high frequency signals while passing signals of desired frequencies. It is designed for use in communication systems and consumer products, and is rated for use in high bandwidth, low power transmission systems. The working principle of the filter lies in its milled wire design, which works by limiting the range of frequencies that can enter or exit the device. The filter also features a temperature compensation system, which further increases the effectiveness and stability of the filter.
The specific data is subject to PDF, and the above content is for reference
FILTER HELICAL 820MHZ TYPE 5HW
FILTER HELICAL 1010MHZ TYPE 5HW
FILTER HELICAL 216MHZ TYPE CBW
FILTER HELICAL 735MHZ TYPE 5HT
FILTER HELICAL 830MHZ TYPE 5HT
FILTER HELICAL 655MHZ TYPE 5HT