601D506G050FE2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are key components of most electronic systems, including 601D506G050FE2. These capacitors are widely seen in power supplies, motor drives, audio systems, lighting control, telecom, and aerospace applications. The 601D506G050FE2 is a long-life, high-voltage, high-capacity aluminum electrolytic capacitor that’s great for keeping a steady voltage across your application field. 

The electrolyte in aluminum electrolytic capacitors contains charged ions in an organic solvent, with the electrodes made of aluminum. The process of forming the electrolytic solution and applying it to an aluminum coil creates a capacitor with an aluminum oxide coating on the surface.  This oxide layer is a dielectric layer that forms a semiconductor barrier between the aluminum and its electrolyte, allowing only a certain amount of current to pass between them under the necessary voltages. 

The typical working principle of an aluminum electrolytic capacitor is as follows. When a voltage is applied across the capacitor, a current is allowed to flow through the anode, which deposits a thin film of aluminum oxide on the surface of the aluminum. This thin oxide film acts as a dielectric material, preventing further oxidation and creating a stable electrical circuit between the capacitor and the application field.  It also prevents further charges from escaping from the capacitor into the application field.

The capacitance of the 601D506G050FE2 is specified either by its rated capacity (C) or its rating in Farads (F). C is expressed as the product of the voltage (V) and the charge capacity (Q). F is equal to the capacitance of the anode separated from the cathode divided by the equivalent series resistance (ESR) of the capacitor. The 601D506G050FE2 is rated for a maximum DC voltage of 1,500V, a capacitance of 600µF, and a maximum rated temperature of 105°C. It has a very low ESR, making it ideal for filtering RF or low-frequency signals in a wide variety of applications.

In general, aluminum electrolytic capacitors are suitable for power conversion, frequency reference, buffering, RF decoupling, and high-precision applications. They’re great for applications where maximum capacitance and high voltages are needed in a minimal amount of space. The 601D506G050FE2 aluminum electrolytic capacitor is an ideal choice for these types of applications, due to its high capacitance, low ESR, and high voltage rating.

The specific data is subject to PDF, and the above content is for reference