74AHCT17APWJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic circuits are often used to transmit data and signals from one part of a system to another. The 74AHCT17APWJ is an address and data bus buffer designed to do exactly this. It\'s an 8-bit high speed buffer designed to help the bus line ebb and flow faster than can be done without it.

The 74AHCT17APWJ is classified as a buffer and logic gate as it can be used to increase the transmission speed from bus line to bus line within a given system. It is based on the ‘AHCT’ (Advanced High-Speed CMOS) technology that was developed by Texas Instruments which uses a combination of features such as output drive capability, low power dissipation, and wide operating voltage range to enhance speed and performance. It is a high performance transfer and storage buffer with improved characteristics itself.

The 74AHCT17APWJ is an address and data bus buffer that is used to separate address and data bus systems. It is mostly used to provide faster bus speeds and eliminate data collisions between differing protocol buses. It increases the speed with which an inbound and outbound protocol system interact with each other, reducing the amount of time it takes signals to move from one part of a system to another.

The core of the 74AHCT17APWJ is a pair of high speed CMOS buffer gates, configured in a multi-way logic configuration. These gates form the data paths that enable the fast transfer of signals between two parts of a system. They are designed to provide either three-state outputs or true complementary outputs depending on the type of application required. The three-state outputs allow for the buffering of multiple data paths, which reduces the number of pins needed on the chip.

The 74AHCT17APWJ is an 8-bit buffer that is powered by a dual-ported supply voltage. It has an open-collector output that is used to provide a logic 0 to the bus line. This open-collector output is also capable of slow-rising and falling time-based signals. As the buffer has its own power that does not affect any of the other components connected to it, the speed of the signals can be increased without any distortion.

The 74AHCT17APWJ has two outputs that are designed to operate at different speeds depending on the requirements of the application. It also has an Enable (E) pin, which is used to help control the flow of the signal, as well as providing signal conditioning for both high and low voltage inputs. The E pin is used to gate the signals moving through the 78AHCT17APWJ.

The 74AHCT17APWJ is mostly used in automotive and communications applications, ranging from network switches and routers to gaming consoles. It is an extremely versatile logic buffer with an impressive list of features and specifications. Its wide operating voltage range and low power operation makes it an ideal choice for a number of applications.

In conclusion, the 74AHCT17APWJ is a versatile 8-bits high speed buffer designed to help the bus line ebb and flow faster than can be done without it. It is used to separate address and data bus systems and provide faster bus speeds to reduce the amount of time it takes signals to move from one part of a system to another. Mostly used in automotive and communications applications, its open-collector output, dual-ported supply voltage, and enable pin make it a great choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference