74AUP1G07FW4-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 74AUP1G07FW4-7 is a single differential line receiver that belongs to the logic-buffers, drivers, receivers and transceivers family. It is designed to be incorporated in applications that require high-speed data transmission with noise immunity and can be used for a wide range of digital input/output operations. It is suitable for the digital signal processing applications from low-speed bus operations to very high-speed serial data communications.

This device is a digital logic circuit with an open drain output. There are two input channels, each with its own digital input/output control. Each of these channels operates independently and can be connected to external digital signals, either from an integrated circuit or from a microprocessor or any other digital device. The differential pair of input lines are connected to the input control lines to accurately sense the electrical conductivity of the external signals.

The two input controls act as buffers between the external signal and the open drain output which then can be used as an input/output control signal. The 74AUP1G07FW4-7 has a wide range of operating logic levels that can be set as low as 3.3V or as high as 5V. The output thresholds can also be adjusted to match the input control levels and the device has an electronic noise immunity to reduce interference from within the system.

The device is intended to be used as an interface between high-speed digital signals and low-speed digital signals. It can be used in applications such as data transmission, communication interface, I/O consolidation, embedded logic circuitry and system synchronization. It is an ideal device for high-speed data transfer where noise immunity is essential. The wide range of operating logic levels makes it suitable for interfacing with a variety of devices.

The working principle of the device is based on voltage level translation. An open drain output is used to interface the two channels, each operating at different logic levels. The input channels receive two external digital signals, each with its own input/output control lines, and these signals are then translated or converted into the corresponding logic levels. The open drain output is then used to control the logic levels of the combined output of both input channels.

The power supply for the device is very flexible and can operate at a voltage range of 1.8V to 5.5V, with an active current consumption of 3.2mA. The device is compatible with the I2C and SPI bus system, as well as with several communication interface products. The 74AUP1G07FW4-7 is also compatible with a wide range of digital devices, such as UARTs, LCDs, keypads and switches.

The 74AUP1G07FW4-7 is an excellent choice for applications that require high-speed data transmission with noise immunity. It is easy to use and has a wide range of voltage compatibility. This device is designed to occupy minimal board space and has a highly configurable design which makes it a useful device in applications such as I/O consolidation and system synchronization.

The specific data is subject to PDF, and the above content is for reference