74V2G66STR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches are primarily used for signal routing and signal selection. Such applications make use of Voltage Controlled Switches (VCS) in order to signal which circuit has to be routed or selected. One of the most popular VCS is the 74V2G66STR, manufactured by TI Corporation. It is a low-on-resistance single-pole double-throw (SPDT) switch, operating from a supply voltage of 2.7V up to 5.5V.

The 74V2G66STR is typically used in applications where signal multiplexing and signal routing are required. Such applications involve the transmission of analog signals between several circuits, usually to minimize area on a printed circuit board (PCB). It can also be used as a multiplexer, to select among two or more input signals and drive the selected signal to output. It may also be used as a demultiplexer, to select one of several input signals and drive the signal to multiple outputs.

The 74V2G66STR is an example of a single-pole double-throw (SPDT) switch. It consists of two terminals (SW and IN) and one output (OUT). The internal structure of the switch is composed of two N-channel MOSFETs (PMOS and NMOS) with the gate terminals connected together. The PMOS is connected between the SW terminal and the OUT terminal, while the NMOS is connected between the IN terminal and the OUT terminal. The switch is operated based on the voltage applied to the SW terminal, with a low voltage on the SW terminal allowing the PMOS to be switched on and a high voltage allowing the NMOS to be switched on.

When the voltage on the SW terminal is low (below the turn-on threshold of the PMOS) the PMOS is switched on, allowing the signal from the IN terminal to be driven to the OUT terminal. When the voltage on the SW terminal is high (above the turn-on threshold of the NMOS) the NMOS is switched on, allowing the signal from the SW terminal to be driven to the OUT terminal. The two FETs are in series, which reduces insertion losses in the switch.

The 74V2G66STR application field and working principle make it well suited for applications where analog signals need to be routed to different circuits or multiplexed/demultiplexed. Its low on-resistance characteristics make it ideal for applications requiring small losses and low noise. The device is also suitable for high-frequency switching, making it suitable for wide range of applications in a variety of industries.

The specific data is subject to PDF, and the above content is for reference