Termination:	Crimp
Material - Insulation:	--
Insulation Diameter:	--
Contact Finish:	--
Contact Material:	Copper
Color:	--
Features:	Brazed Seam, Serrated Termination
Insulation:	Non-Insulated
Wire Gauge:	16-22 AWG
Series:	Solistrand
Mounting Type:	Free Hanging (In-Line)
Length - Overall:	0.856" (21.74mm)
Width - Outer Edges:	0.469" (11.91mm)
Thickness:	0.031" (0.79mm)
Stud/Tab Size:	1/4 Stud
Terminal Type:	Circular
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

8-34113-1 Applications and Working Principle

Terminals - Ring Connectors

Ring connectors are electrical connectors consisting of a closed loop that is used to terminate a wire or a cable. Such a connection is typically found in telecommunication networks, as well as in industrial and military applications. The 8-34113-1 is a type of ring connector designed for these types of applications.

Design and Construction

The 8-34113-1 is a single-piece terminal ring that is designed to withstand high current and vibration. It is constructed using either a tin-plated aluminum or a copper core material. The connector is designed to accept 8-32, 10-32, and 5/16" diameter hardware screws. It has an outer diameter of 3/8" and an inner diameter of 1/4". The connector is designed with a split ring which allows for easy access to the connecting screws when mounting the connector.

Applications

The 8-34113-1 is used in a variety of applications, including communications, industrial control, and automotive applications. It is particularly useful in telecommunication networks where it is used to connect the ground wire, the signal wire, and the AC power lines. The connector also finds use in military applications due to its robustness, durability, and excellent electrical contact characteristics.

Working Principle

The working principle of the 8-34113-1 is based on the use of a pin-and-socket type connection. The two ends of the terminal ring are connected to the desired wires via the use of the pin-and-socket connection. This connection then creates a circuit which closes the gap that was present between the two wires. This in turn creates an electrical contact, allowing the two wires to be electrically connected.

Installation

Installing the 8-34113-1 is relatively straightforward. It is typically done by drilling a hole at the appropriate location for the connector. Then the split ring is inserted into the hole and a nut is used to secure the connector into place. To make the connection, the two wires must then be connected to the two ends of the pin-and-socket connection, after which the nut is tightened to secure the connection. The connection should then be tested before being used in any application.

Conclusion

The 8-34113-1 terminal ring connector is a robust and reliable connector designed for use in a variety of applications, including telecommunications, industrial control, and automotive applications. It is designed to terminate two wires via the use of a pin-and-socket connection, allowing for a secure and reliable connection. Installation is relatively straightforward, and the connection tested before being used.

The specific data is subject to PDF, and the above content is for reference