92J2R7E

Series:	90
Packaging:	Bulk
Part Status:	Active
Resistance:	2.7 Ohms
Tolerance:	±5%
Power (Watts):	2.25W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.220" Dia x 0.406" L (5.60mm x 10.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through Hole Resistors are one of the oldest and most widely used electrical components today. They come in various shapes and sizes, and are found in virtually all electronic products on the market. Through hole resistors applications include current limiting, voltage clamping, signal conditioning, and power supply regulation.The 92J2R7E, a through hole resistor, is a component for resistors in general and is commonly used in electronic circuits. It is a commonly used resistor type with a value of 2.7 Ohms and a tolerance of 5%. This makes the 92J2R7E a good replacement for any 2.7 Ohm resistor or other resistance of higher tolerance. The 92J2R7E has four pins on its base and two leads that come out from the body. The two leads are insulated with a plastic resin and make electrical contact with the circuit board’s trace. The 92J2R7E is designed to be placed on the circuit board and soldered into place in order to keep the electrical connection secure. The pins are connected to the trace via metal-to-metal contact. This configuration helps reduce the chance of arcing and other electrical problems.

92J2R7E Application Field and Working Principle

The 92J2R7E is most commonly used in consumer electronics such as cell phones, televisions, and computers. It can be used to regulate the current or voltage in these products. It can also be used in wiring systems, such as in the case of lighting control systems, and in other applications such as testing and measurement circuits. The working principle of the 92J2R7E is to limit or regulate current and voltage. The 92J2R7E slows down the current flow and also reduces the voltage drop across a circuit. The 92J2R7E also ensures that the maximum current is not exceeded in order to prevent any damage to the circuit board or components. It is also used to reduce the power consumption in applications and to improve the circuit stability in various areas. The 92J2R7E through hole resistor can also be used to form voltage dividers. Voltage dividers are commonly used in audio systems and are the basis of many types of measurement circuits. They create a voltage drop between two points proportional to the resistor\'s value. The 92J2R7E is well suited for voltage dividers because of its 2.7 Ohm value and 5% tolerance.The 92J2R7E is relatively small in size. It is usually mounted to a circuit board either directly on to the board or using a socket. It can be installed horizontally or vertically depending on the application. The 92J2R7E has a high temperature resistance, and is usually rated for working temperatures up to 125°C. It is relatively inexpensive and widely available. The 92J2R7E through hole resistor is a reliable and effective component for many applications. Its good temperature stability, low costs, and compact size make it a perfect choice for many consumers demanding from the highest quality.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description