995954

Series:	RS
Part Status:	Active
Process Side Connection:	Terminal Blocks - Screw Connection
Control Side Connection:	Rectangular, Male
Control Side Cable Retainer:	Latches
Positions / Poles:	10
Features:	--
Voltage - Rated:	--
Current Rating (Per Contact):	3A
Operating Temperature:	-20°C ~ 60°C
Length:	1.969" (50.01mm)
Width:	2.756" (70.00mm)
Wire Gauge:	14-26 AWG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks - interface modules are one of the most essential components in the field of electronic engineering. They are used in nearly all applications, ranging from small and portable devices to complex industrial installations. The basic purpose of these terminal blocks is to make connections between different electrical components.To understand the working principle of terminal blocks, one must first understand the purpose of these devices. A terminal block consists of two or more contact points that are used to connect different devices. The contact points are usually arranged in a series of male and female connectors. The female connectors are where the wire from the device that is being connected is inserted, while the male connectors are used to carry the current from one device to another.To use a terminal block effectively, an electrical engineer needs to determine the type of device that he/she wants to connect. The type of device determines the type of contact points that are required. For instance, for connecting power sources to loads, the contact points need to be rated for the required amount of amperage. For connecting a battery to a charger, the contact points must match the required voltage.Once the type of contact points has been chosen, the engineer needs to determine the type of wire that needs to be used. In most cases, the wire needs to be shielded to protect it from any interference. After that, the engineer needs to connect the terminals to the wire and circuit in the correct manner. This connection must be made securely and correctly to ensure the proper functioning of the device.Once the connections have been made, the engineer can then begin testing the device. In most cases, the device will be connected to a test system or a test board, where the engineer can measure the performance of the device. Depending on the application, the engineer may need to adjust the connections in order to achieve the desired performance. Once the adjustments have been made, the engineer can then continue with the testing process to determine the performance of the device.Terminal blocks - interface modules are commonly used in many different industries, including automotive, aerospace, and consumer electronics. They are also widely used in industrial automation systems and robotics. They are also found in medical and laboratory equipment, as well as in telecom and power applications.Terminal blocks and other interface modules are becoming increasingly important in many electronic products. By understanding the working principle of terminal blocks, an engineer can easily determine the best way to use the devices in different applications. As well, by understanding the type of device that is being connected and the type of connection that is required, an engineer can make sure that the performance of the device is optimal. Terminal blocks are thus a key component of any electrical application, and an understanding of their working principle is necessary to properly implement them. With the ever increasing demand for more technologically advanced products, the demand for reliable and efficient interface modules will continue to grow. Consequently, research and development into the design and functionality of these terminals blocks is always being done to create better and more efficient devices that can provide increased performance and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description