Allicdata Part #: | A642-29-ND |
Manufacturer Part#: |
A642-29 |
Price: | $ 0.00 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Xeltek |
Short Description: | ADAPTER PROGRAMMER 96-BGA |
More Detail: | Xeltek Programmers - Socket Module - BGA |
DataSheet: | A642-29 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Module/Board Type: | Socket Module - BGA |
For Use With/Related Products: | Xeltek Programmers |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A642-29 is a kind of programming adapter which can be used to double the number of pins. This type of adapter is actually made up of a single rectangular shaped adapter, which has a set of chip pins at each side. Each side of the adapter contains a male and a female pin, and they are connected together by a special wire which runs along the length of the adapter. The wire is connected to the pins via small metal contact points.
This type of adapter is mainly used for programming circuit boards. It provides a way to double the number of I/O pins on a single board. By connecting the two sides of the adapter, two separate I/O connections are available for the board, allowing more components and pins to be connected in the same space. The number of I/O pins available will depend on the number of pins in the adapter.
The working principle of A642-29 is very simple. It relies on the use of electrical signals sent through the wire to control the flow of data between the pins on both sides. When a signal is sent from one side, it travels along the wire and is picked up on the other side. The signal is then interpreted by the board and the appropriate action is performed.
The main benefit of using this type of adapter is its flexibility. It allows the same level of power and signals to be available on both sides of the board. This means that more different components can be used in a single board, without having to worry about overloading any particular pin. In addition, the number of pins available will depend on the number of chip pins on either side, so designers can customize their design as necessary.
A642-29 is also very easy to use. The adapter simply needs to be connected to the board by means of a socket or power connection. Once connected, it is ready to be used. No special programs or wires are needed to make use of the adapter.
In summary, A642-29 is a programming adapter which is used to double the number of I/O pins on a single board. It is relatively easy to use, and offers designers great flexibility when it comes to component selection. It is also relatively inexpensive, making it a good choice for most applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
A642-23 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-24 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-25 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-26 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-29 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-30 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-32 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-39 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-41A | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-43 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642-52 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
A642A | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 96-BGA... |
ADAPTER INT 80C196 DIP40/PLCC68ChipProg-...
ADAPTER SOCKET 44-QFP TO 40-DIPChipProg-...
ADAPTER FOR PL-MPUAltera Devices MegaCor...
PROG ADAPTER FOR 1800/1810JAltera Device...
88-PIN UFBGA ADAPTERAltera Devices - Soc...
PROG ADAPTER 7K 44 PIN TQFPAltera Device...