ACPL-M72T-500E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ACPL-M72T-500E Application Field and Working Principle

Optoisolators- Logic Output, such as ACPL-M72T-500E, are devices which electrically isolate two attached circuits from each other and convert electrical signals. It also blocks unwanted digital noise or signal transfer from one circuit to the other and is most commonly used in the industrial, medical, and telecom fields where isolation between two circuits is necessary.

ACPL-M72T-500E is an optoisolator series of digital output with high isolation barrier, a low propagation delay, and a wide operating temperature range. Operating at a voltage from 4.5V to 5.5V and a temperature from -40°C to +105°C, ACPL-M72T-500E is suitable for both AC and DC current. It also has a wide selection range of isolation voltage from 3750Vrms to 5000Vrms, making it an ideal choice for isolating circuits.

The working principle of ACPL-M72T-500E is based on an internal LED that emits optical signals when powered up and this signal is detected by an opto-detector, which then produces an electrical signal at its output. The LED is placed in a closed package and connected to the power source (generally 12V AC) via the leads. When the LED is powered on, it emits light which is then detected by the opto-detector and converted into an electrical signal. This signal can then be used for transmitting data between two circuits without any signal transfer.

Apart from isolation between two circuits, there are other benefits of using ACPL-M72T-500E. It can serve as a digital circuit breaker providing protection against catastrophic short circuits or overload. It has a built-in power-on reset timer allowing for a smooth reset of the circuits, giving it flexibility to handle changes in load conditions. It also has a high common-mode transient immunity, which ensures reliable operation against disturbances. The overall performance of ACPL-M72T-500E is superior in comparison to traditional signal switching devices.

In conclusion, ACPL-M72T-500E is an optoisolator series of digital output which is ideal for isolating circuits because of its isolation voltage range, operating voltage and temperature, and other features. Its working principle is based on optical signal emission and electrical signal conversion via optical detection, providing a reliable and high-performance solution to circuit isolation and signal transfer needs.

The specific data is subject to PDF, and the above content is for reference