ADG333ABRZ

Series:	--
Packaging:	Tube
Part Status:	Active
Switch Circuit:	SPDT
Multiplexer/Demultiplexer Circuit:	2:1
Number of Circuits:	4
On-State Resistance (Max):	45 Ohm
Channel-to-Channel Matching (ΔRon):	5 Ohm
Voltage - Supply, Single (V+):	3 V ~ 30 V
Voltage - Supply, Dual (V±):	±3 V ~ 20 V
Switch Time (Ton, Toff) (Max):	90ns, 80ns (Typ)
-3db Bandwidth:	--
Charge Injection:	2pC
Channel Capacitance (CS(off), CD(off)):	7pF
Current - Leakage (IS(off)) (Max):	250pA
Crosstalk:	-85dB @ 1MHz
Operating Temperature:	-40°C ~ 85°C (TA)
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	20-SOIC
Base Part Number:	ADG333

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADG333ABRZ Interface - Analog Switches, Multiplexers, Demultiplexers Application Field and Working Principle

The ADG333ABRZ is an integrated chip set used for analog switch, multiplexer, and demultiplexer applications. It features two or four selectable analog channels with reconfigurable switch and multiplexer ranges. It is designed to have a wide range of supply voltage, low power consumption, low drive voltage, and low cutoff voltage. The ADG333ABRZ has a wide range of applications in consumer, automotive, and medical electronics, including smart card readers, medical device development, and cell phone signal conversion.This chip set is designed to provide superior signal switching performance in the form of low insertion loss, high isolation, and low cross-talk. It is also designed to have high switching speeds to reduce signal degradation.The ADG333ABRZ is composed of four independent analog switches with two to four selectable channels, reconfigurable switch and multiplexer ranges, with high switching speed. This four-channel analog switch chip set also features a low drive voltage and low cutoff voltage.The ADG333ABRZ application field can be divided into two categories: 1. Switch Applications 2. Multiplexer and Demultiplexer Applications Switch Applications: The ADG333ABRZ is primarily used as a 4-channel analog switch and has two or four selectable channels, reconfigurable switch and multiplexer ranges. It is designed to provide superior signal switching performance in the form of low insertion loss, high isolation, and low cross-talk. The switching speed of the chip is quite high so as to minimize signal degradation.Multiplexer and Demultiplexer Applications: Multiplexers and demultiplexers allow the user to select and control multiple inputs and multiple outputs independently. The ADG333ABRZ application is used to control multiplexing and demultiplexing a signal input. It has two or four selectable channels, with reconfigurable switch and multiplexer ranges. The chip is designed to provide superior signal multiplexing and demultiplexing performance in terms of low insertion loss, high isolation and low switching cross-talk.Working Principle: It is very difficult to describe the working principle of the ADG333ABRZ chip set in detail as it is a complex integrated circuit. However, in general, the ADG333ABRZ works in two ways. Firstly, it has two or four selectable channels, reconfigurable switch and multiplexer ranges. When a signal input is applied, the chip is programmed to select the appropriate channel. The switch and multiplexer ranges are configured to ensure a low insertion loss and low cross-talk. This ensures signal integrity and signal splitting performance. Secondly, the chip is designed to have a high switching speed, this helps to reduce signal degradation. So, when a signal is input, the signal is routed through the chip quickly and switch ranges are configured to reduce signal attenuation. To sum up, the ADG333ABRZ chip set helps to control multiplexing and demultiplexing the signal input. Conclusion: In conclusion, the ADG333ABRZ is an integrated chip set used for analog switch, multiplexer and demultiplexer applications. Its features two or four selectable analog channels with reconfigurable switch and multiplexer ranges. The chip set has a wide range of applications in consumer, automotive and medical electronics. The chip set provides superior signal switching performance in the form of low insertion loss, high isolation and low cross-talk. It can be used to control multiplexing and demultiplexing a signal input.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description