ADS7279IRSAR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters or ADC are used to convert analog data to digital data and vice-versa. The ADS7279IRSAR is an 8-bit successive approximation register (SAR) ADC which provides user selectable resolutions from 8-bits down to 6-bits. It is especially beneficial in applications that utilize narrow bandwidths. The ADS7279IRSAR provides fast data acquisition times, high performance, and low power consumption for battery-operated applications such as portable medical devices.

The ADS7279IRSAR utilizes a pipelined architecture to achieve high speeds over a wide bandwidth while reducing power requirements. The device is configured with an embedded Digital Logic Core (DLC) that allows selectable gain settings and thresholds to optimize performance, reduce power consumption, and enable faster data acquisition. Additionally, it features synchronous sampling, digital calibration, and a multi-chatter interface to enable low latency, high accuracy data collection, simplifying data processing and enabling quick actionable insights.

The ADS7279IRSAR application field is wide, but mostly it is used in medical, audio processing, monitoring, measurement and control, fire-prevention and security systems. Possible applications for this ADC may include ECG monitors, portable medical devices, RF transceivers, vibration monitoring systems and gas detectors.

The ADS7279IRSAR device works depending on the following principles adapted from Sar ADC Theory:

1. Sampling and Hold: The input signal is first converted from analog to digital (or back from digital to analog) using a sampling and hold amplifier. This is a special type of amplifier that is used to convert a signal from analog to digital or back again. The output of the sampling and hold amplifier will be a voltage or current, depending on the type of system.

2. A/D Conversion: The digital signal is then sent to an analog to digital converter that will convert the signal into an 8-bit binary output. The resolution of the output will be determined by the accuracy of the ADC.

3. Serial Interface: The output from the ADC is then sent via a serial interface to the digital logic block of the device, where information is processed and stored. This interface is used to communicate data to and from the device, as well as store and retrieve data.

4. Digital Logic Block: The digital logic block controls the operation of the ADC, enabling the user to select resolution, frequency, gain, and other parameters. It also contains a memory to store configuration, calibration data, and conversion results.

5. Output: The data is then sent to the output pins of the device, which can then be used to control other systems or to display the result of the conversion.

The ADS7279IRSAR enables fast data acquisition times and can be used to collect accurate and consistent data in medical, audio processing, monitoring, measurement and control, fire-prevention and security systems. As it offers user selectable resolutions from 8-bits down to 6-bits, and a low power consumption, this ADC is proving to be highly beneficial in battery-operated applications. The ADS7279IRSAR is based on a pipelined architecture to provide a high speed over a wide bandwidth without sacrificing low power requirements, which makes it perfect for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference