AISC-0805-R33G-T

DC Resistance (DCR):	1.4 Ohm Max
Height - Seated (Max):	0.061" (1.55mm)
Size / Dimension:	0.090" L x 0.068" W (2.29mm x 1.73mm)
Supplier Device Package:	0805
Package / Case:	0805 (2012 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100MHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	600MHz
Q @ Freq:	40 @ 250MHz
Series:	AISC-0805
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	310mA
Tolerance:	±2%
Inductance:	330nH
Material - Core:	Ceramic
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed inductors, or inductors that are wound on a form and then sealed in an enclosure, consists of a coil of wire wrapped around a cylinder or core. This type of inductor is used in both AC and DC power supplies for a variety of applications such as filtering, decoupling, and transient suppression. One of the most common examples of fixed inductor’s is the AISC-0805-R33G-T. This article will discuss the application field and working principle of the AISC-0805-R33G-T. The AISC-0805-R33G-T is a surface-mount high-frequency inductor that is designed for high-frequency power switching. It is commonly used in inverters, motor controllers, electric vehicles, and other electronic design applications. The component has a hematite ferrite core and three high-temperature magnet wires with a tinned copper coating. The inductance of the component ranges from 0.220 to 0.680uH and its maximum DC current is 7.3A. The DC resistance is 0.0145 ohms and its Q-factor is greater than 248. A fixed inductor essentially works in the same way an electromagnet does. When an electric current is passed through the coil of wire, it sets up a magnetic field which induces the opposite current to flow through the wire. As the current passes through the core, it causes a magnetic flux that is stored in its inductance. The inductance is proportional to the area of the core magnetic field and the number of turns in the coil. When the coil is connected to a power source, it stores energy in the form of the magnetic field.The AISC-0805-R33G-T is ideal for high frequency switching because it has a low DC resistance and a very high Q-factor. This means it can handle a large amount of current without causing a noticeable increase in voltage drop. It is also able to handle a wide range of frequencies, making it an ideal choice for switching applications. It is also able to store energy up to a certain point, which makes it very efficient. In terms of applications, the AISC-0805-R33G-T is often found in motor controllers, inverters, electric vehicles, and other electronic design applications. The low-inductance and low-DC resistance make it an ideal choice for high-frequency switching applications. It is also ideal for applications such as power line filters, low-pass filters, band-pass filters, and telecommunication switching applications. In conclusion, the AISC-0805-R33G-T is an ideal fixed inductor for high-frequency applications such as inverters, motor controllers, and electric vehicles. It has a low DC resistance and a high Q-factor which makes it ideal for these types of applications. Its low inductance and wide frequency range make it suitable for power line filters, low-pass filters, band-pass filters, and telecommunication applications. The AISC-0805-R33G-T is an effective way to store energy in a compact form and is a perfect fit for any design application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description