ALS71H243DB040

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are electrical components built to handle a variety of electrical tasks, ranging from signal filtering, bypassing, DC blocking, and coupling. They are particularly suitable for circuits that require a large amount of energy, such as power supplies, converters, audio applications, and motors.

ALS71H243DB040 Application Field and Working Principle

The ALS71H243DB040 is a radial lead variety of aluminum electrolytic capacitors, which offers a high capacitance/volume ratio. It is a non-polar electrolytic capacitor that has a voltage rating of 400 VDC, operating temperature range of -40 to +105 C, and a capacitance of 4700uF. Typical applications for the ALS71H243DB040 include smoothing and filtering of power supplies, low frequency signal coupling, and DC blocking.

As aluminum electrolytic capacitors are composed of two electrodes that are separated from one another by an electrolytic medium, the working principle of the ALS71H243DB040 is based on the capacititance between the two electrodes. The electrodes are usually aluminum plates, which are coated in an oxide film to act as dielectric, and are insulated using a paper or film roll and plastic box. When a voltage is applied, a charge stored in the capacitor’s plates is released, inducing current flow though the device. The amount of charge discharged depends on the capacitance of the device at the given voltage.

The ALS71H243DB040 is primarily used as an energy storage device in circuits, such as power supplies and audio systems. The capacitor is designed to provide large amounts of energy on demand at high frequencies. As such, it can act as a reservoir for energy, allowing circuits to be powered in short bursts or pulses.

Another important use for the ALS71H243DB040 is in improving power supply filtering and ripple. Electrolytic capacitors act as a buffer, or filter, for power supplies, preventing irregularities from being passed through the circuit. A capacitor is connected in parallel with the power supply rail, which will fill up and arrest any voltage spikes that may occur. The capacitor will then release this energy slowly and steadily, creating a ‘smoother’ output.

In addition, aluminum electrolytic capacitors are often employed in DC blocking circuits, in which a DC voltage is blocked or passed through a load while an AC voltage is allowed to pass. As an example, such circuits may be found in loudspeaker crossover networks, whereby the capacitor is used to block the DC voltage without disturbing the AC signal. This prevents an unwanted bass boost.

Aluminum electrolytic capacitors, such as the ALS71H243DB040, offer an efficient and cost effective solution for a variety of electrical tasks. They are reliable and rugged, providing an extra level of reliability for any Electrical Engineering project.

The specific data is subject to PDF, and the above content is for reference