ASEMPC-100.000MHZ-T3

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	26mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	35mA
Operating Temperature:	-20°C ~ 70°C
Series:	Pure Silicon™ ASEMP
Voltage - Supply:	2.25 V ~ 3.6 V
Output:	CMOS
Function:	Enable/Disable
Frequency:	100MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are devices that produce a repeating waveform output signal, such as a sinusoidal wave. They are used in a variety of applications, from radios and television receivers to communication systems and electronic circuit design. A particular type of oscillator, known as an ASEMPC-100.000MHZ-T3, is designed for high-frequency applications and has a wide range of applications and working principles.The ASEMPC-100.000MHZ-T3 consists of a quartz crystal resonator, a pair of transistors, and varactor diodes. The output frequency is determined by the resonant frequency of the quartz crystal, the operating voltage, and the load capacitance. The varactor diodes are used to adjust the capacitance, which allows for the adjustment of the output frequency and for the generation of different waveforms.The oscillator is used primarily in the radio frequency (RF) range, although it can be used in the lower and higher frequency ranges as well. It is used in communication systems such as mobile phones and satellite dishes, and in automatic test systems to measure the frequency of an incoming signal.In terms of its working principle, the ASEMPC-100.000MHZ-T3 operates on the principle of negative feedback. It uses an inverter stage to convert the input signal into a triangular waveform, which is then used as reference voltage by the oscillator. The oscillator then compares the reference voltage with that of the output and adjusts the duty cycle of the output by adjusting the frequency. The oscillator maintains a constant output frequency, and the output signal can be used for a variety of applications.The ASEMPC-100.000MHZ-T3 is also widely used in the design of electronic circuits. Its low cost and ease of use make it an attractive choice for the manufacture of consumer electronic products. It is used in a variety of circuits, from oscillator circuits to oscilloscope circuits to filter networks.The ASEMPC-100.000MHZ-T3 is a very reliable device, and it is very easy to use. It does not require a large amount of power to run, and it is capable of generating a wide range of frequencies. The ease of use and reliability make it a popular choice for many applications.In conclusion, the ASEMPC-100.000MHZ-T3 is a type of oscillator used in a variety of applications and working principles. It is used in communication systems, for automatic test systems, and for the design of electronic circuits. Its low cost and ease of use make it an attractive choice for the manufacture of consumer electronic products. Its reliable performance, wide frequency range, and ease of use make it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description