ASTX-H11-B-26.000MHZ-I25-T

Frequency Stability:	±2.5ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.043" (1.10mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	5.5mA
Operating Temperature:	-40°C ~ 85°C
Series:	ASTX-H11
Voltage - Supply:	2.5V
Output:	HCMOS
Function:	Enable/Disable
Frequency:	26MHz
Type:	TCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the Astx-H11-B-26.000MHZ-I25-T Oscillator

The Astx-H11-B-26.000MHZ-I25-T is a precision oscillator designed for use in applications that require a reliable and accurate frequency source. It utilizes an advanced low phase noise design to ensure excellent performance in even the most demanding applications.

Application Areas

The Astx-H11-B-26.000MHZ-I25-T oscillator is well suited for use in applications that require the highest level of precision and performance. These include broadcast television, radio frequency (RF) communications and navigation systems. Additionally, it can be used for precision timing and synchronization in digital systems such as microcontrollers, digital signal processors and GPS receivers.

Working Principle

The Astx-H11-B-26.000MHZ-I25-T oscillator is a precision device that utilizes advanced IC technology to generate a very stable and accurate frequency output. The oscillator contains a quartz crystal resonator which acts as a precisely tuned resonant frequency source. The frequency output is derived from the quartz crystal oscillator and is stable over temperature and aging due to the thermal compensating elements built into the IC.The operation of the Astx-H11-B-26.000MHZ-I25-T oscillator relies on a negative feedback control loop. This loop produces a continuous oscillation at a frequency determined by the characteristics of the crystal resonator. The amplitude of the oscillation is kept constant by using an amplifier to maintain a constant voltage across a resistor. This resistor is connected to the negative input of the amplifier, and its resistance is typically determined by the total capacitance of the resonator.

Conclusion

The Astx-H11-B-26.000MHZ-I25-T oscillator is a precision device designed for use in a wide range of applications that require a reliable and accurate frequency source. It utilizes advanced IC technology and an innovative low phase noise design to provide high precision and performance. The working principle of the oscillator relies on a negative feedback control loop that uses an amplifier and a fixed resistor to maintain a constant voltage across the crystal resonator, thus producing a stable and accurate frequency output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description