AT-100-(0)(40)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic components used to reduce the power of a signal without causing any distortion of the signal itself. The AT-100- (0) (40) is an example of one such attenuator. It is a PIN diode based step attenuator designed for use in the 0 to 40 MHz frequency range.

In terms of construction, the AT-100- (0) (40) essentially consists of a PIN diode blade assembly connected between two silver-plated, brass-bushinged SMA connectors. The other end of the diode blade assembly is connected to a screwdriver terminal, which allows for fine tuning of the signal attenuation.

The working principle of the AT-100- (0) (40) begins with the pin diode blade assembly, which is designed to produce a resistance that can be adjusted from 0 dB to 40 dB. The resistance is achieved by using combinations of diodes that are connected in series and/or parallel. Each PIN diode has its own forward and reverse biasing voltage, which allows the user to precisely control the total resistance of the attenuator.

The AT-100- (0) (40) also incorporates a "shunt mode" which essentially adds up to 40 dB of additional signal attenuation. This shunt mode is activated by applying a voltage to the shunt terminal, which causes the diode blade assembly to switch on and off in a specific sequence. The off times of the sequence are equal to the resistance, which is determined by the specified potentiometer setting. By controlling the on/off sequence of the diode blades, it is possible to achieve a maximum attenuation of 80 dB.

The AT-100- (0) (40) is used in a variety of different applications. These include: RF power amplifiers, modulators, receivers, exciters, linear amplifiers, digital signal processing equipment, and cellular networks. Additionally, the AT-100- (0) (40) can be used in radio transmission systems, HF radios, or any other system that requires precise control over signal attenuation.

In conclusion, the AT-100- (0) (40) is a high-quality step attenuator designed for use in the 0 to 40 MHz frequency range. It is capable of providing up to 80 dB of signal attenuation using its PIN diode blade assembly and its shunt mode. The AT-100- (0) (40) is used in a variety of applications, including RF power amplifiers, modulators, receivers, exciters, and linear amplifiers. As such, it is an invaluable component for ensuring a high-quality signal in any radio transmission system.

The specific data is subject to PDF, and the above content is for reference