AT-16.000MAGE-T Crystals, Oscillators, Resonators |
|
Allicdata Part #: | 887-1608-2-ND |
Manufacturer Part#: |
AT-16.000MAGE-T |
Price: | $ 0.22 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 16.0000MHZ 12PF SMD |
More Detail: | 16MHz ±30ppm Crystal 12pF 50 Ohms HC-49/US |
DataSheet: | AT-16.000MAGE-T Datasheet/PDF |
Quantity: | 3000 |
1000 +: | $ 0.20160 |
3000 +: | $ 0.18900 |
5000 +: | $ 0.18270 |
10000 +: | $ 0.17640 |
Specifications
Series: | AT |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 16MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 12pF |
ESR (Equivalent Series Resistance): | 50 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | AEC-Q200 |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.161" (4.10mm) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The AT-16.000MAGE-T crystal is a type of crystal used for frequency control and timing purposes. Crystals are small components that use a precise frequency to provide a precise clock or frequency reference. Crystals are fitted to many different devices, from computers to cell phones. The AT-16.000MAGE-T is a frequency-controlled and temperature-compensated (FTCT) crystal, which provides a steady frequency over a wide range of temperatures.An AT-16.000MAGE-T crystal consists of two electrodes separated by a tuning fork-shaped quartz crystal. Quartz crystals have several unique properties that make them ideal for frequency-control and timing purposes. Firstly, quartz crystals have a very consistent resonant frequency, which is determined by the size and shape of the crystal. Secondly, they are temperature-stable, which means that their frequency is not affected by changes in temperature. Finally, quartz crystals are piezoelectric, which means that an electric voltage can be used to alter the crystal\'s resonant frequency.To oscillate, an AT-16.000MAGE-T crystal must be connected to an oscillator circuit. This typically consists of an amplifier, an external capacitor and an RFC (resistor-capacitor-combination) circuit. An input voltage is applied to the crystal, which then starts to oscillate. The oscillator then amplifies the signal and outputs the precise oscillation frequency. This frequency determines the clock speed of the device, which is why crystals are required for most digital devices.The AT-16.000MAGE-T crystal is used in many different applications. It is commonly used in digital watches, oscillators, computers, servers, and other devices that require a precise and consistent frequency reference. In addition, the AT-16.000MAGE-T is also suited for use in frequency-controlled radio receivers, as well as modems, fax machines, and audio equipment.In general, AT-16.000MAGE-T crystals are very reliable and accurate frequency references. They are relatively inexpensive and easy to manufacture, which makes them popular for applications that require precise timing. As such, AT-16.000MAGE-T crystals can be found in almost any device that requires a reliable frequency reference.The specific data is subject to PDF, and the above content is for reference
Latest Products
CSTCE8M59G55A-R0
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
416F520X3CLT
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
416F500X3AKT
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
416F48022CKT
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
416F44023ITT
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
416F406X2AST
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...